Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Engine management
   System of onboard diagnostics (OBD) - a principle of functioning and codes of malfunctions
   Removal and installation RSM/ESM
   Check of serviceability of a condition and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a condition and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a condition and replacement of the sensor of temperature of soaked-up air (IAT)
   Check of serviceability of a condition and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a condition and replacement of the sensor of VMT/provision of a cranked shaft (TDC/CKP)
   Check of serviceability of a condition and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a condition and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a condition and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a condition and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a condition and replacement of the sensor of a detonation
   Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of structure of an air and fuel mix (FIA)
   System of operated ventilation of a case (PCV)
   System of a retsirkulyatsiya of the fulfilled gases (EGR) - the general information, check of a condition and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a condition and replacement of components
   The catalytic converter - the general information, check of a condition and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check of serviceability of a condition and replacement of the sensor of position of pistons (CYP)

CHECK

 PERFORMANCE ORDER

1. The CYP sensor serves for definition of the current position of pistons. Information issued to them is used at definition of sequence of injection of fuel. The sensor is built in assembly of the distributor of ignition, its refusal leads to record in memory of system of self-diagnostics of codes of malfunction Р1381 and Р1382.

2. For check of serviceability of functioning of the CYP sensor disunite a plait of electroconducting of the distributor and by means of an ohmmeter measure resistance between contact plugs 3 and 4. Compare result of measurement to requirements of Specifications.

3. Make sure of lack of conductivity between each of plugs and a car-care center workshop.
4. In case of negative results of the described check replace the distributor (see. Head engine Electric equipment).

REPLACEMENT

 PERFORMANCE ORDER

The CYP sensor is built in assembly of the distributor of ignition and its replacements in an individual order is not provided. In case of a sensor exit out of operation replace the distributor (see. Head engine Electric equipment).