Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Engine management
   System of onboard diagnostics (OBD) - a principle of functioning and codes of malfunctions
   Removal and installation RSM/ESM
   Check of serviceability of a condition and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a condition and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a condition and replacement of the sensor of temperature of soaked-up air (IAT)
   Check of serviceability of a condition and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a condition and replacement of the sensor of VMT/provision of a cranked shaft (TDC/CKP)
   Check of serviceability of a condition and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a condition and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a condition and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a condition and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a condition and replacement of the sensor of a detonation
   Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of structure of an air and fuel mix (FIA)
   System of operated ventilation of a case (PCV)
   System of a retsirkulyatsiya of the fulfilled gases (EGR) - the general information, check of a condition and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a condition and replacement of components
   The catalytic converter - the general information, check of a condition and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





System of operated ventilation of a case (PCV)

 

The PCV system (see an accompanying illustration) serves for decrease in issue in the atmosphere of hydrocarbonic connections at the expense of a conclusion from the engine of karterny gases. The purge of the block is carried out by pro-race of fresh air arriving from an air purifier through a case in which it mixes up with the collected evaporations and broken of chambers of combustion by gases and deduced via the PCV valve in the inlet pipeline.

The PCV valve, the filter of a purge and set of the vacuum hoses connecting listed devices to the engine belong to number of the main components of system.

For the purpose of maintenance of stability of turns of idling the PCV valve blocks a purge stream at deep depression in the inlet pipeline. In case of violation of serviceability of functioning of the engine (as, for example, at wear process of piston rings) the system makes branch of excess of karterny gases through a ventilating tube back in an air purifier.

The description of procedures of check and replacement of the PCV valve is provided in the Section Check and replacement of the valve of system of operated ventilation of a case (PCV).