Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Engine management
   System of onboard diagnostics (OBD) - a principle of functioning and codes of malfunctions
   Removal and installation RSM/ESM
   Check of serviceability of a condition and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a condition and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a condition and replacement of the sensor of temperature of soaked-up air (IAT)
   Check of serviceability of a condition and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a condition and replacement of the sensor of VMT/provision of a cranked shaft (TDC/CKP)
   Check of serviceability of a condition and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a condition and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a condition and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a condition and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a condition and replacement of the sensor of a detonation
   Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of structure of an air and fuel mix (FIA)
   System of operated ventilation of a case (PCV)
   System of a retsirkulyatsiya of the fulfilled gases (EGR) - the general information, check of a condition and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a condition and replacement of components
   The catalytic converter - the general information, check of a condition and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check of serviceability of functioning and replacement of the air valve of correction of structure of an air and fuel mix (FIA)

CHECK

 PERFORMANCE ORDER

1. The considered system provides supply of the cleared air in injection injectors in the course of engine functioning. Supply of additional air allows to make pauperization of an air and fuel mix and to provide more its complete combustion during acceleration.
2. Start the engine, disperse it to 3000 rpm and wait operations of the fan of system of cooling. Dump engine turns to the single.

3. Disconnect a hose of supply of air of the FIA valve from an inlet sleeve and connect to a hose the vacuum gage.

4. Manually open a butterfly valve, then completely it close. Depth of depression should change with change of turns of the engine.
5. In the absence of variations of depth of depression check correctness of laying and a condition of vacuum hoses. If hoses as it should be, replace the FIA valve.

REPLACEMENT

 PERFORMANCE ORDER

1. Turn out a fixing bolt and remove the FIA valve from the delivery chamber of an air path.

2. Installation is made upside-down.