Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Engine management
   System of onboard diagnostics (OBD) - a principle of functioning and codes of malfunctions
   Removal and installation RSM/ESM
   Check of serviceability of a condition and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a condition and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a condition and replacement of the sensor of temperature of soaked-up air (IAT)
   Check of serviceability of a condition and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a condition and replacement of the sensor of VMT/provision of a cranked shaft (TDC/CKP)
   Check of serviceability of a condition and replacement of the sensor of position of pistons (CYP)
   Check of serviceability of a condition and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a condition and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a condition and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a condition and replacement of the sensor of a detonation
   Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)
   Check of serviceability of functioning and replacement of the valve of stabilization of turns of idling (IAC)
   Check of serviceability of functioning and replacement of the air valve of correction of structure of an air and fuel mix (FIA)
   System of operated ventilation of a case (PCV)
   System of a retsirkulyatsiya of the fulfilled gases (EGR) - the general information, check of a condition and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a condition and replacement of components
   The catalytic converter - the general information, check of a condition and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)

VSS is established on a case of transmission and represents the sensor with the variable magnetic resistance, starting to develop tension impulses as soon as speed of movement of the car passes for value of 4.8 km/h (3 miles at an o'clock). Impulses from the sensor arrive on RSM and are used by the module at management of duration of time of opening of injectors of injection of fuel and transmission switching. On models from RKPP one VSS, on the models equipped with AT is used, two sensors of speed are provided: one is connected to secondary shaft of the transmission, the second, - with intermediate shaft, and the exit of any of them out of operation leads to problems with transmission switching.

CHECK

 PERFORMANCE ORDER

Models with RKPP

1. Disunite the socket of a plait of electroconducting of the sensor. By the voltmeter measure tension on the socket (from a plait). Positive щуп the voltmeter it is necessary to connect to the plug of a black and yellow wire, negative - to weight. On the socket tension of the battery should take place. If a food is absent, check a condition of electroconducting of VSS on a site between the sensor and the assembly block of safety locks (at the left under the dashboard). Make sure also of serviceability actually a safety lock. By means of an ohmmeter check conductivity existence between the plug of a black wire of the socket and weight. If conductivity is absent, check a condition of a black wire and quality of its terminal connections.
2. To Poddomkratta a car front also establish it on props. Prop up protivootkatny boots back wheels and transfer transmission to neutral situation. Connect to VSS electroconducting, include ignition (the engine do not start) and test the voltmeter the plug of an alarm (dark blue-white) wire from a reverse side of the socket (negative щуп connect to mass of a body). Holding one of forward wheels motionless,
manually повращайте opposite, - tension should fluctuate in limits from zero to 5 In, otherwise replace VSS.

Models with AT

3. Disconnect electroconducting from the corresponding sensor of speed. By means of an ohmmeter measure resistance between two plugs of the sensor. The nominal rate makes about 400 ÷ 600 Ohm, - otherwise replace the sensor.

REPLACEMENT

 PERFORMANCE ORDER

1. Disconnect from the sensor of speed electroconducting.
2. Turn out the fixing screw and remove the sensor from a transmission case.
3. Installation is made upside-down. Do not forget to replace a sealing ring.