Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
- Systems of cooling, heating
   Antifreeze - general information
   Check of serviceability of functioning and thermostat replacement
   Check of a condition of fans of system of cooling and chains of their inclusion, replacement of fans
   Removal and installation of a radiator and broad tank of system of cooling
   Check of a condition of the water pump
   Replacement of the water pump
   Check of serviceability of functioning and replacement of the block of the sensor of a measuring instrument of temperature of cooling liquid
   Check of serviceability of functioning of the driving electromotor of the fan of a heater and condition of components of its electric chain, replacement of components
   Removal and installation of the electromotor of a drive of the fan of a heater
   Removal and installation of assembly of the control panel by functioning of a heater and air conditioner, adjustment of a driving cable
   Removal and installation of the heat exchanger of a heater
   Check of serviceability of functioning and service of systems of heating and air conditioning
   Check of an electric chain of the coupling of coupling of the To/in compressor
   Removal and receiver dehumidifier installation To/in
   Removal and To/in compressor installation
   Removal and To/in condenser installation
   Removal and To/in evaporator installation with the broad valve
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Systems of cooling, heating

Specifications

General parameters

Volume of cooling liquid See. Head of Control and routine maintenance
Effort of a tension of a driving belt See. Head of Control both routine maintenance and Governing bodies and operation receptions
Settlement pressure of a cover of a radiator, kgf/cm 2 0.1 ÷ 1.3
Temperature of complete opening of the thermostat, °C 91
Efforts of a tightening of carving connections N • m
Bolts of a cover of a casing of the thermostat 11.8
Bolts of fastening of the water pump to the block 11.8

Arrangement of components of systems of cooling, heating and air conditioning in an impellent compartment of the car (the V6 engine is shown, for 4-cylinder models the scheme of an arrangement of components is similar)

1 — the Radiator
2 — the Condenser
3 — Fans of systems of cooling and air conditioning

4 — the Water pump
5 — the Thermostat
6 — the Broad tank


Thermostat components

1 — the Flange
2 — the Piston
3 — the pumping Valve
4 — the Main screw spring

5 — the Secondary screw spring
6 — the Frame
7 — the Main valve
8 — a valve Saddle

System of cooling of the engine

All models of cars considered in the real Management are equipped with system of cooling of the engine working at superfluous pressure with thermostatic management of circulation of working liquid. The water pump of rotor type is fixed on the block of the engine and provides pumping of cooling liquid through an okhladitelny path of the last. The stream of liquid washes regions of an arrangement of each of cylinders in the block and goes to a back part of the engine. Laid in molding of the block and a head of cylinders okhladitelny channels provide intensive cooling of inlet and final ports, areas of installation of spark plugs and directing plugs of final valves.

The Voskozapolnenny thermostat supervises working temperature of the engine in the course of its warming up. The first minutes after start of the cold engine the thermostat remains closed, preventing thereby circulation of cooling liquid through a radiator. When the temperature of the engine reaches normal working value, the valve of the thermostat opens, connecting to a cooling contour a radiator providing the maximum intensity of a heat-conducting path from a working body (cooling liquid).

The system of cooling has a tight design and is densely closed by a cover of the radiator, capable to maintain a certain superfluous pressure that provides increase of a boiling point of cooling liquid and, respectively, efficiency of a heat-conducting path through a radiator. At excess by internal pressure in system of some certain value, the podpruzhinenny plate of the radiator of a safety valve built in in a cover rises over the saddle, providing an overflowing of excess of cooling liquid on a connecting (perelivny) tube in a broad tank. In process of system cooling liquid automatically comes back from a tank to a radiator.

Dolivaniye of cooling liquid in system is made through a mouth of a broad tank which at the same time acts also as a receiver accumulating in forced out from a radiator excess of liquid.

In view of the listed features of a design, such system of cooling received the name closed as in it any functional losses of cooling liquid are excluded.

Heating system

The main components of system of heating of salon are the electric fan and the heat exchanger located in a box-shaped casing of a heater. The heat exchanger is connected by means of rubber hoses to system of cooling of the engine. The control unit is built in by functioning of the heater/conditioner of air in the car dashboard. The cooling liquid warmed up in the engine circulates via the heater heat exchanger, giving the to air warmly filling a casing. At inclusion of heating of salon there is an opening of a lamellar zaslonka therefore the internal volume of a casing of a heater incorporates to salon volume. At turning on of the fan the krylchatka of the last starts to banish air submitted to salon via the heat exchanger, providing its intensive warming up.

Air central air

The structure of system includes the condenser established ahead of a radiator close to the heat exchanger of a heater the evaporator, fixed on the engine block the compressor and a receiver dehumidifier equipped with the reduktsionny valve of a high pressure. All components are connected among themselves by refrigerator lines.

The fan banishes air arriving in salon through the heat exchanger of the evaporator working in a mode, the return to a mode of functioning of a radiator. A coolant pumped over through the heat exchanger, evaporating, selects at air surplus of heat. The temperature in salon thus decreases to demanded comfortable value (at the choice of the operator).