Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
- Engine
   + Four-cylinder engines
   + V6 Engines
   - General and major maintenance of the engine
      Check of pressure of oil
      Check of kompressionny pressure in cylinders
      Diagnostics of a condition of the engine with use of the vacuum gage
      Removal of the power unit from the car - preparation and precautionary measures
      Removal and engine installation
      Alternative versions of schemes of regenerative repair of the engine
      Order of dismantling of the engine by its preparation for major maintenance
      Dismantling of a head of cylinders
      Cleaning and check of a condition of a head of cylinders
      Service of valves
      Assembly of a head of cylinders
      Removal and check of a condition of balancing shaft (4-cylinder engines)
      Removal of shatunno-piston assemblies
      Removal of a cranked shaft
      Cleaning of the block of the engine
      Check of a condition of the block of the engine
      Honingovaniye of mirrors of cylinders
      Check of a condition of components of shatunno-piston group
      Check of a condition of a cranked shaft
      Check of a condition and selection of loose leaves of radical and shatunny bearings of a cranked shaft
      Engine assembly order
      Installation of piston rings
      Installation of a cranked shaft and check of working gaps of radical bearings
      Installation of a back epiploon of a cranked shaft
      Installation of shatunno-piston assemblies and check of size of working gaps in shatunny bearings of a cranked shaft
      Installation of balancing shaft (four-cylinder engines)
      Trial start and engine running in after major maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Installation of balancing shaft (four-cylinder engines)

 PERFORMANCE ORDER

1. Accurately directing, lay carefully wiped and greased balancing shaft in the engine block. Try not to damage bearing surfaces.
2. Having established a forward balancing shaft and приболтив his holder, establish into place the oil pump.
3. Establish a cogwheel of a forward balancing shaft and, having blocked a back shaft a bolt or a screw-driver (see. The section Removal and check of a condition of balancing shaft (4-cylinder engines)), plant and приболтите a conducted gear wheel of a back shaft.

4. Grease persistent surfaces of the leader and pure molibdensoderzhashchy greasing conducted gear wheels. Achieve flute combination on a back flange of a cogwheel with the index on a gear wheel casing, then plant a casing on the block, entering thus gear wheels into gearing, - the cogwheel can be developed slightly clockwise.

5. After the casing of a gear wheel will be established, check, that the label on a cogwheel was combined with the index on a cover of the oil pump. If this condition is executed, screw fixing bolts and tighten them with demanded effort.

6. The description of procedure of installation of a belt of a drive of balancing shaft is provided in appropriate section of the present Chapter.