Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
- Engine
   + Four-cylinder engines
   + V6 Engines
   - General and major maintenance of the engine
      Check of pressure of oil
      Check of kompressionny pressure in cylinders
      Diagnostics of a condition of the engine with use of the vacuum gage
      Removal of the power unit from the car - preparation and precautionary measures
      Removal and engine installation
      Alternative versions of schemes of regenerative repair of the engine
      Order of dismantling of the engine by its preparation for major maintenance
      Dismantling of a head of cylinders
      Cleaning and check of a condition of a head of cylinders
      Service of valves
      Assembly of a head of cylinders
      Removal and check of a condition of balancing shaft (4-cylinder engines)
      Removal of shatunno-piston assemblies
      Removal of a cranked shaft
      Cleaning of the block of the engine
      Check of a condition of the block of the engine
      Honingovaniye of mirrors of cylinders
      Check of a condition of components of shatunno-piston group
      Check of a condition of a cranked shaft
      Check of a condition and selection of loose leaves of radical and shatunny bearings of a cranked shaft
      Engine assembly order
      Installation of piston rings
      Installation of a cranked shaft and check of working gaps of radical bearings
      Installation of a back epiploon of a cranked shaft
      Installation of shatunno-piston assemblies and check of size of working gaps in shatunny bearings of a cranked shaft
      Installation of balancing shaft (four-cylinder engines)
      Trial start and engine running in after major maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Engine assembly order

Before starting engine assembly, make sure available all necessary details, materials and tools to which number the following belongs:

a) Standard set of the metalwork tool;
b) A Dinamometrichesky natural a drive on 1/2-dyuymv;
c) The tool for putting on of piston rings;
d) The tool for a staving of piston rings;
e) Short pieces of a fuel hose for putting on on hairpins of covers of shatunny bearings;
f) Measuring set of Plastigage;
g) Set щупов lezviyny type;
h) A file with small tooth;
i) Fresh impellent oil;
j) Assembly impellent or greasing on the basis of a molybdenum disulphate;
k) Prokladochny hermetic;
l) Hermetic for fixing of carving connections.

With a view of economy of time and minimization of volume of arising problems make engine assembly in the following order:

Four-cylinder engines

a) Piston rings;
b) Cranked shaft and radical bearings;
c) Shatunno-porshnevye;
d) Back epiploon of a cranked shaft;
e) Soyedinitelny Bridge of covers of radical bearings;
f) Maslootrazhatelny plate;
g) Balancing shaft;
h) Oil pump;
i) Maslozabornik with the mesh filter;
j) Case pallet;
k) Head of cylinders;
l) Camshaft and assembly of yokes;
m) A gas-distributing belt with cogwheels;
n) Cover of a gas-distributing belt;
o) Cover of a head of cylinders;
p) Inlet pipeline and final collector;
q) Flywheel / driving disk.

V6 engines


a) Piston rings;
b) Cranked shaft and radical bearings;
c) Shatunno-porshnevye;
d) A back epiploon of a cranked shaft with the holder;
e) Maslootrazhatelny plate;
f) Oil pump;
g) Case pallet;
h) Heads of cylinders;
i) Camshafts and components of the klapanny mechanism;
j) A gas-distributing belt with cogwheels;
k) Covers of a gas-distributing belt;
l) Inlet pipeline and final collectors;
m) Covers of heads of cylinders;
n) Flywheel / driving disk.