Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check of a condition of tires and pressure of their rating

(each 400 km [250 miles] run or weekly)

PRESSURE OF THE RATING OF THE TYRE DOES NOT SUFFICE

 


CHASHEVIDNYE DEFECTS

The following reasons of formation of chashevidny defects are possible:
  -  Tires are too poorly pumped up, or the mechanical deviation (violation of balancing of a wheel or disk deformation) takes place.
  -  Weakened fastening of steering drafts or the pendular lever of a steering drive, or the listed components are worn-out.
  -  Components of a forward suspension bracket are damaged or worn-out, or weakened their fastening

 


TOO HIGH PRESSURE OF THE RATING OF TYRES

 


CONVERGENCE ADJUSTMENT IS BROKEN, OR DISORDER OF WHEELS IS TOO GREAT


 


THE SCALY WEAR OF THE PROTECTOR CAUSED BY VIOLATION OF CORNERS OF INSTALLATION OF WHEELS

 


The conscientious attitude to regular check of a condition of tires will allow the driver to avoid the annoying delays connected with an exit of a wheel out of operation during movement. Besides, on nature of wear of protectors it is possible to reveal beforehand the developments which were at a stage defects of components of a suspension bracket and a steering drive.

The minimum admissible depth of a protector makes 1.6 mm. To estimate degree of wear of a protector it is possible by means of the special inexpensive adaptation - ask in shops of automobile accessories.

Pay attention to any signs of non-uniform wear of a protector. Such local defects as a chashevidny wipe, uploshcheniye, etc., are usually obliged by the emergence to violations of corners of installation of forward wheels, or balancing of the last. For identification and elimination of malfunctions the car should be driven away in a specialized workshop of car-care center or on car repair shop.

Attentively examine tires of all wheels on existence of cuts, punctures and got stuck in flutes of a pattern of a protector of extraneous subjects. Sometimes the punched wheel during any time continues to hold in itself air in view of that the subject which has punctured the tire continues to remain thrust in it. Defect of a nipple of the gate of a rating of a wheel can be the reason of a slow spuskaniye of the tire, - check a nipple condition.

Attentively check a protector on existence of the subjects which have got stuck in it or violation of tightness of landing of repair "jams" by means of which repair of small punctures of the tire is made. To make sure available a puncture it is easily possible by wetting of a suspected site of a surface of the tire by solution of soap water - if the puncture takes place, water will start to bubble. Insignificant punctures on size easily are under repair in shinomontazhny workshops.

Attentively examine internal walls of tires of all four wheels on existence on them потеков brake liquid. In case of identification of those immediately check a condition of the corresponding brake mechanisms and the hydraulic lines connected to them.

Podderzhivaniye of demanded pressure of a rating of tires will allow to prolong essentially service life of wheels, besides, will provide the maximum comfort at movement and let's reduce controllability of the car. Remember that it is correct to measure pressure in the tire by eye it is almost impossible, in particular, if it is a question of tires of a radial design. It is necessary to hold constantly near at hand a suitable manometer, - on gas stations and car repair shops it is not necessary to trust indications of measuring instruments of compressors of pumping.

Check pressure of a rating of tires at cold wheels, - it is meant that the car passed no more than one mile within the last three hours. Remember that increase of pressure upon 0.3 ÷ 0.6 kgfs/cm 2 as a result of a warming up of a wheel is quite natural phenomenon.

Remove from the gate of a rating of a wheel a protective cap and densely press a manometer nozzle to an exhaust outlet of the gate, having wrung out a nipple rod. Consider the read instrument and compare it to standard data, in case of need correct pressure.

Do not forget to screw on a place a protective cap of the gate in order to avoid hit in a moisture and dirt nipple. Check pressure in all wheels, including the spare.

Pressure of a rating запаски is usually much higher than compact type, than at usual wheels.