Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check and adjustment of turns of idling

(each 48 000 km [30 000 miles] run or times in 24 months)

CHECK

 PERFORMANCE ORDER

1. Frequency of rotation of the engine is called as turns of idling at the released pedal of gas. This parameter is among critical, defining both operation of the engine as a whole, and serviceability of functioning of its various subsystems.
2. Cock the parking brake and wheels prop up protivootkatny boots. Make sure that transmission is transferred to neutral transfer (RKPP) or established in the situation "R" or "N" (AT).
3. According to instructions of manufacturers connect a manual tachometer.

4. Disconnect the 2-contact electric socket from the electromagnetic valve of a purge of a coal adsorber of EVAP system (see an accompanying illustration).

5. Start the engine and at frequency of rotation of 3000 rpm warm up it to normal working temperature.
6. As soon as there will be a turning on of the fan of system of cooling, slowly dump engine turns to the single. Make sure that all accessories are disconnected, and transmission is transferred to neutral transfer (RKPP), or to the situation "R" "/N" (AT).
7. Consider the indication of a tachometer and compare it to the value given on a label of VECI, or in Specifications to the present Chapter.

In case of different interpretations the preference should be given to information provided on a label of VECI.

ADJUSTMENT

 PERFORMANCE ORDER

1. Before starting adjustment, make sure that the fan of system of cooling is switched off.

2. If turns of idling fall outside the limits an admissible range, take a cap (see an accompanying illustration) and make necessary adjustment, rotating the adjusting screw a screw-driver in the corresponding direction. Rotation of the screw make short steps (on 1/4 turns for an approach), each time checking new turns of the engine.

3. Muffle the engine and disconnect a tachometer. Restore initial connection of the electromagnetic EVAP valve.