Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts

(each 24 000 km [15 000 miles] run or times in 12 months)

The condition of components of a suspension bracket and steering drive should be made regularly as their wear or damage can be at the bottom of reduction of service life of tires, conduct to decrease in controllability of the car and fuel consumption increase.

Check of a condition of shock-absorbers

 PERFORMANCE ORDER

1. Park the car on an equal horizontal platform, whenever possible with a firm covering. Firmly cock the parking brake and check pressure of a rating of tires.
2. Press down one of car corners. At a corner otpuskaniye the body should come back to a starting position, making no more than one-two fluctuations.
3. Body rocking with high degree of probability testifies to wear or weakening of the corresponding shock-absorber.
4. Repeat procedure, serially passing to the remained corners of the car.
5. To Poddomkratta the car also establish it on props.

6. Attentively examine shock-absorbers on existence of signs of leakages of liquid. Existence of a thin oil film should not cause concern. Without fail make sure that a source of leak is the shock-absorber, in case of need make replacement of shock-absorbers in a set (forward and back).

7. Check reliability of fastening of shock-absorbers on the support. In case of detection of defects replace shock-absorbers (also in a set).
8. The description of procedure of replacement of shock-absorbers is provided in the Section Replacement of the shock-absorber or a screw spring of rack-mount assembly.

Check of a condition of components of a suspension bracket and steering drive

 PERFORMANCE ORDER

1. Visually check components of a suspension bracket and a steering drive on existence of deformations and mechanical damages. Estimate a condition of sealing cuffs, protective covers and rezinometallichesky plugs, try not to pass signs of development of leaks.

2. Clear of dirt traces the bottom surface of a rotary fist, ask the assistant to grasp bottom edge of a wheel and to pull it in the cross-section direction. Try to estimate visually люфт in spherical support of connection of a fist with a suspension bracket control lever. At existence люфта the worn-out hinge is subject to replacement.

3. Grasp forward and back edges of a wheel, then press on a first line and pull for the back. In case of identification люфта in joints of components of a steering drive check a condition of the pendular lever and tips of steering drafts. Pass to other board of the car and repeat procedure, having pulled an opposite wheel.

4. More detailed information on a design of components of a suspension bracket is provided in Head the Suspension bracket and a steering.

Check of a condition of protective covers of power shafts

 PERFORMANCE ORDER

1. Established since both ends of each of power shafts the goffered rubber covers are urged to protect hinges of equal angular speeds (CV JOINTS) from the destructions connected with hit of dirt in them. Oil and greasing hit on a surface of covers can lead to their premature destruction. It is expedient to wash out from time to time covers solution of soap water. In view of a constant flexure at turns of wheels, covers of external CV JOINTS wear out quicker and should be checked more often and more regularly.

2. Attentively check covers on existence of cuts, cracks and other damages, estimate reliability of fixing them bandage tapes. In case of detection of defects, or traces of leakages of greasing the damaged cover is subject to replacement (see. Head Coupling and power shafts).