Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check of a condition of components of system of cooling

(each 12 000 km [7500 miles] run or times in 6 months)

 PERFORMANCE ORDER

1. The wide range of engine failures is connected with violation of functioning of system of cooling. On the models equipped with AT, this system provides also ATF cooling, supporting thereby optimum conditions for transmission work.
2. Check of a condition of components of system of cooling should be made after complete cooling of the power unit (not less than in three hours after an engine stop).
3. Uncover a radiator for what at first turn it to the left to the first emphasis. If the hissing indicating superfluous pressure in system is heard, wait its terminations, then press a cover a palm down ипродолжайте to turn to the left before liberation. Carefully wash out a cover from within and outside pure water. Also wash out a jellied mouth of a radiator. From cleared surfaces all traces of corrosion should be completely removed. The cooling liquid which was in system should be rather transparent. If liquid is painted in color of a rust, the system should be washed out and filled with a fresh mix (see. Section Service of system of cooling (oporozhneniye, washing and filling)). If level of liquid does not reach top, add in a radiator a little more mix of demanded structure (see. Section Check of levels of liquids).

4. Attentively examine the top and bottom radiatorny hoses together with hoses of system of heating of the salon, having smaller diameter and located between the power unit and a partition of an impellent compartment. Check hoses on all their length and in case of identification of cracks, swellings and signs of aging of a material make replacement of defective components. Small cracks are usually simpler for making out at a hose szhimaniye). Regardless of a condition it is necessary to change hoses approximately time in two years.

5. Check reliability of fastening of all hoses on the unions/branch pipes. Leakages of cooling liquid usually are shown in a look потеков rusty or white color on surfaces surrounding their source. If hoses are fixed on unions/branch pipes by collars of braided type, it will be reasonable to replace the last more reliable worm or screw.
6. Having blown the compressed air, or by means of a soft brush, remove from gaps between plates of the heat exchanger of a radiator old leaves, remains of insects and other garbage. Try not to damage soft plates of the heat exchanger and not to cut about their keen edges fingers.
7. Every second check, and also at the first signs of violation of functioning of system of cooling make check of a cover of a radiator by pressure. If near at hand there will be no suitable equipment, address for the help on car repair shop.