Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Condition check, adjustment of effort of a tension and replacement of driving belts

(each 12 000 km [7500 miles] run or times in 6 months)

CHECK

 PERFORMANCE ORDER

1. Driving, or as them sometimes call, V-shaped belts are located in a forward part of the power unit and play important role in functioning of the engine and many other systems of the car. Eventually belts wear out and should look round regularly according to the schedule of routine maintenance of the car in order to avoid the serious engine failures which correction of consequences can become the owner of the car in kopek.

V-obraznykh family of belts treat as well the multicostal.

2. The quantity of driving belts used on the engine depends on a car complete set. Belts are applied to a drive of such auxiliary units, as the generator, steering and water pumps, the compressor of the conditioner of air, etc. Depending on the scheme of an arrangement of the pulleys, by one belt can be put in action more than one unit.

3. Muffle the engine, open a cowl and find driving belts in a forward part of the power unit. Highlighting itself a small lamp, fingers feel belts on all their length, checking on existence of cracks and stratifications. Presence on a belt of attritions, zapolirovanny sites to shine and other obvious defects is inadmissible also. Examine belts from both parties for what overwind them.

4. Check of effort of a tension of a belt is made by a nazhimaniye on it by a hand thumb on a site in the middle between two next pulleys. Pressing should be rather firm. In parameter, harakteriziruyushchy the effort of a tension of a belt, is size of its deflection at a nazhimaniye. As a rule, if pulleys defend from each other at distance from 180 to 280 mm, the size of a deflection should make 6.4 mm, to distance between pulleys in 305 ÷ 405 mm there corresponds a deflection in 12.5 mm - for a wedge-shaped belt, and 6.4 mm - for multicostal.

5. On the models equipped with V6 engines a belt of a drive of the generator/compressor of the conditioner of air it is equipped with an automatic natyazhitel, thus, possibility of correction of effort of its tension is not provided. The structure of an automatic natyazhitel includes the indicator of degree of wear of a belt (on size of its stretching).

ADJUSTMENT

 PERFORMANCE ORDER

1. On the V6 models the belt of a drive of the generator/compressor of the conditioner of air is equipped with an automatic natyazhitel. Correction of effort of a tension of all other belts is made manually by shift in the relevant party of units given by them.

2. For correction of a tension of a generating belt on 4-cylinder models and a belt of a drive of the steering pump on the V6 models weaken bolts of fastening of the corresponding units and rotate in the demanded party an adjusting bolt (clockwise for belt pulling up, counter-clockwise - for the purpose of its easing).

3. The belt of a drive of the steering pump on 4-cylinder models is regulated by an otpuskaniye of fixing bolts and unit shift by means of a collar for a drive of face naturals by a square nozzle on half-inch.

4. Having finished adjustment, make sure of correctness of a tension of belts. In case of need repeat adjustment procedure.

REPLACEMENT

 PERFORMANCE ORDER

1. On the V6 models throw with a long key of the corresponding size the central bolt of a pulley of a natyazhitel and, having turned a natyazhitel counter-clockwise, remove a generating belt. On all other models for removal of a generating belt from the pulleys weaken effort of its tension according to the instructions stated above. It is meaningful to make at the same time replacement at once all driving belts. Before finally removing a belt from the car, mark the direction of its rotation of a belt and the laying scheme in streams of pulleys.
2. Upon purchase of new belts take with itself old as samples - replaceable belts should correspond strictly removed from the car on a standard size.
3. On termination of replacement adjust a tension of new belts.