Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
- Gear shifting box
   + 5-step manual box of gear shifting (RKPP)
   - 4-step automatic transmission (AT)
      Problem diagnostics AT/CVT - the general information
      Removal, installation and adjustment of a cable of gear shifting
      Removal and installation of the lever of switching (selector) of transfers
      Blocking system - the general information, condition check, replacement and adjustment of an electromagnet of management
      Adjustment and replacement of the sensor switch of provision of transmission
      Check and replacement of electromagnetic valves of management with transmission functioning
      Removal and installation of 4-step and automatic transmission (AT)
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Check and replacement of electromagnetic valves of management with transmission functioning

CHECK

 PERFORMANCE ORDER

1. Three pairs electromagnetic valves of management of transmission functioning are subject to check: The valve of management of blocking/switching And, valves of management of switching In and With and valves of management of pressure of coupling.

Electromagnetic valve of management of blocking/switching And

2. Disunite the 2-contact electric socket of assembly of the electromagnetic valve of management of blocking/switching And and measure resistance between each of socket plugs (from the valve) and weight. Compare results of measurements to requirements of Specifications. In case of need replace valve assembly.

3. By means of a wire crossing point serially connect each of socket plugs to a positive pole of the battery, - distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, it is necessary to drive away the car on car repair shop for carrying out full-scale diagnostics of ESM and contours of electromagnetic valves.

Electromagnetic valves of management of gear shifting In and With

4. Disunite 2-contact electric sockets of electromagnetic valves of management of gear shifting and measure resistance between plugs 1 and 2 of each of them. Compare results of measurements to requirements of Specifications. In case of need replace assembly of the defective valve.

5. By means of a wire crossing point serially connect the plug 2 sockets of each of valves to a positive pole of the battery, - the plug 1 should be earthed. Distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, the defective valve is subject to replacement.

Electromagnetic valves of management of coupling functioning

6. Disunite contact sockets of valves of management of pressure of coupling and measure resistance between plugs 1 and 2 of each of sockets. Compare results of measurements to requirements of spices. In case of need replace the defective valve.

7. By means of a wire crossing point serially connect the plug 1 of each of valves to a positive pole of the battery, - the plug 2 should be earthed. Distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, the defective valve is subject to replacement.

REPLACEMENT

 PERFORMANCE ORDER

To make replacement only one of electromagnetic valves (And and managements of pressure of coupling) in an individual order it is not obviously possible, - their replacement is made assembled whereas valves B and C can be replaced separately.

1. Turn out fixing bolts and remove klapanny assembly.

2. Carefully wipe interfaced surfaces and clean маслотоки.
3. Replace sealing a laying/ring and establish new klapanny assembly on the regular place. Tighten fixing bolts with demanded effort.
4. Check the electric socket on existence of signs of pollution and oxidation of contact plugs, in case of need clean and again connect.
5. Check serviceability of functioning of electromagnetic valves of management.