Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ electric equipment Schemes





Check of serviceability of functioning and replacement of switches of the dashboard

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. The Safety cushion section - the general information). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.

Main switch of activation темпостата

CHECK

 PERFORMANCE ORDER

1. For check the switch is necessary for removing from the car.
2. With the help or the lamp sampler equipped with the individual power supply check conductivity existence between switch plugs in its both provisions. In case of need replace assembly.

 

REPLACEMENT

 PERFORMANCE ORDER

1. Hook the switch a small screw-driver and take it from the dashboard. Disunite the electric socket.

In order to avoid damage of plastic stick on a screw-driver sting an adhesive tape strip.

2. Disconnect electroconducting and remove switch assembly.
3. Installation is made upside-down.

Switch of the alarm system

CHECK

 PERFORMANCE ORDER

1. For check liberate the switch from facing of assembly of panel hours.
2. Make sure of correctness of distribution of conductivity between plugs in both positions of the switch. In case of need make assembly replacement.

 

REPLACEMENT

 PERFORMANCE ORDER

1. Having accurately hooked, take assembly of panel hours with the casing from the central section of the dashboard.

2. Disunite the 10-contact socket from the back party of the switch. Wring out a lock uvula and liberate switch assembly from the panel of facing of hours.
Switch of activation of heating of back glass

CHECK

 PERFORMANCE ORDER

1. The switch drives in structure of assembly of the control panel functioning of the heater/conditioner of air. The description of procedures of removal and installation of assembly is provided in the Head of System of cooling, heating.

2. Give to drink the help of an ohmmeter or the lamp sampler equipped with the independent power supply check conductivity existence between plugs B4 and В9 of the 22-contact socket of the control panel. Conductivity should take place only at heating and glass inclusion (the button of the switch is drowned). In case of need replace the switch.

REPLACEMENT

 PERFORMANCE ORDER

1. Turn out fastening screws among themselves forward and back sections of the control panel. In the course of removal of the forward panel hold it an obverse surface up.

Before starting dismantling of the control panel prepare the replaceable switch which, probably, it is necessary to order at firm car repair shop.

2. Remove the old switch and establish on its place new, then joint among themselves and compress hands forward and back sections of the control panel functioning of the heater/conditioner of air. Screw and tighten fixing screws.
3. Establish control panel assembly on the regular place (see. Head of System of cooling, heating).