Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ electric equipment Schemes





The relay - the general information and check of serviceability of functioning

For giving of power supply or a management signal on some of consumers of the electric power in the car (such as components of system of injection of fuel, a horn, a starter, the fan (ы) cooling systems, fog lights and so forth) are used by the relay. Actually the relay represents the electric key providing short circuit of VV of a contour on NV to a signal. In case of a relay exit out of operation there is a refusal of functioning of the corresponding consumer. The most part of the relay is placed in the assembly block located in an impellent compartment, others are scattered on the car. The description of check of serviceability of functioning of the relay is provided below. The failed relays are subject to replacement.

CHECK

 PERFORMANCE ORDER

1. If it is not possible to find out a way of turning on of the relay in the corresponding electric contour according to schemes of electric connections, it is necessary to remember that the approach to check of any relay in principle is identical in all cases.
2. In the majority of the relay the management contour is always connected to two of contact plugs. When giving on these NV plugs of tension the current starts to circulate on a winding of management of the relay therefore there is a short circuit of big contacts of a working contour of the consumer of the electric power. Other plugs are plugs of working (VV) of a contour.
3. For the purpose of simplification of identification of plugs of the relay explanatory marking is usually put on its case with the image of the scheme of connection of keys.

4. Connect the wire crossing point equipped with a safety lock between one of plugs of management of the relay and the positive plug of the battery. By means of the second wire crossing point earth the second plug of management, - the relay should publish click. Some relays demand obligatory observance of polarity of connection, - if click did not occur, try to change polarity of connection of plugs of management.
5. At the connected wires crossing points check conductivity existence between contour VV plugs, having connected an ohmmeter according to the key scheme on the relay case.
6. At negative result of check replace the relay.