1998-1999 of release
Repair and car operation
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Onboard electric equipment
Search of causes of failures of electric equipment
Safety locks - the general information
The relay - the general information and check of serviceability of functioning
Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
Check of serviceability of functioning and replacement of podrulevy switches
Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
Check of serviceability of functioning and replacement of switches of the dashboard
Check of serviceability of functioning of measuring instruments of a combination of devices
Removal and installation of a combination of devices
Removal and installation of a radio receiver and loudspeakers
Removal and installation of the aerial of a radio receiver
Replacement of lamps of head headlights
Adjustment of the direction of optical axes of head headlights
Replacement of block headlights
Replacement of lamps
Running fires of light time of day (DRL)
Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
Check of serviceability of functioning and replacement of horns of a horn
Check of serviceability of functioning and regenerative repair of a heater of back glass
Control system of speed (темпостат) - general information and check of serviceability of functioning
The electric drive of window regulators - general information and check of serviceability of functioning
The uniform lock - general information and check of serviceability of functioning
The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
Safety cushions - the general information
+ electric equipment Schemes
The electric drive of window regulators - general information and check of serviceability of functioningThe control system of functioning of window regulators consists of switches of management, driving electromotors, regulators of window regulators, mechanisms of lowering-podnimaniya of glasses and connecting electroconducting. Electromotors of a drive of window regulators are located in door assemblies of the car.
Management of window regulators can be carried out from a driver's place by means of the main switch, or by means of manipulations with individual door switches. Each of glasses is equipped with the separate driving electromotor of reversive type. Switching of a key of the switch polarity of connection of the motor and, as a result, the direction of its rotation changes.
The contour is protected by a safety lock and the chain breaker. Each of electromotors is in addition equipped with the individual breaker preventing possibility of a conclusion out of operation of all system at jamming of separate glass.
The electric drive of window regulators functions only at the included ignition. In addition, on many models possibility of blocking of window regulators back (and sometimes and a lobby passenger) doors from the main switch is provided. Do not forget about this function at check of refusals of screen wipers.
Described procedures have the most general character therefore if their performance does not allow to reveal unequivocally a cause of failure, drive away the car for more detailed diagnostics on car repair shop.
In default window regulators always first of all check a condition of a safety lock and the chain breaker.
If window regulators of back doors cope only from the main switch, check conductivity of the blocking switch in the released condition. The faulty switch replace.
Check an electroconducting condition on a chain site between switches and the assembly block of safety locks. Make necessary repair.
At refusal of functioning of the main switch only one of glasses, check serviceability of operation of this window regulator from the individual switch.
If the switch as it should be, check on break and short circuit a chain on a site between the suspected switch and the driving electromotor of this window regulator.
If the window regulator does not work from both switches, remove the panel of an internal upholstery from this door and check serviceability of giving of a food both on the switch, and on the driving motor of a regulator (at the relevant position of the switch).
If a food on the motor does not move, check on conductivity existence electroconducting on a chain site between switches and motors (in case of need address to schemes of electric connections at the end of the present Chapter). If the contour is equipped with the executive relay, check serviceability of a zapityvaniye and grounding of the last.
Having made necessary corrections, repeat check of functioning of window regulators.