Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ electric equipment Schemes





Check of serviceability of functioning and replacement of horns of a horn

CHECK

 PERFORMANCE ORDER

First of all always check a safety lock condition.

1. Disconnect from horn horns electroconducting.
2. For check of serviceability of functioning of a horn submit on one of its plugs tension of the battery. The second plug earth (use wires crossing points). If the horn does not publish a sound signal, replace it.

3. At serviceable sounding of a horn check tension existence on the horn socket at the pressed button of management. If tension takes place, check a grounding condition.

4. If tension is absent, check the corresponding relay (see. The Relay section - the general information and check of serviceability of functioning).
5. If the relay as it should be, check serviceability of giving of a food on the relay of capacity and a management contour. At violation of giving of a food in any of contours check an electroconducting condition on a chain site between the relay and the assembly block of safety locks.
6. If tension regularly moves in both contours, press the button of a horn and check conductivity of the switch on weight. In the absence of conductivity check a chain on break. If a chain as it should be, replace the horn switch.
7. In the absence of conductivity of the switch check on break and short circuit a chain on a site between the relay and the switch.

REPLACEMENT

 PERFORMANCE ORDER

1. For the purpose of ensuring access to a horn remove a loker of protection of an arch of the left forward wheel (see. Head Body).

2. Disunite electric sockets and turn out bolts of fixing arms.

3. Installation is made upside-down.