Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ electric equipment Schemes





Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers

Check of a chain of the electromotor

Before starting performance of check study the corresponding electric circuits. Tension stock-taking on plugs of the socket is made by approbation their shchupy the earthed lamp sampler (on 12 In). Inclusion of a lamp confirms tension existence on the plug. If during performance described below checks to reveal a cause of defect it is not possible, the car should be driven away on car repair shop for more complete diagnostics of system.


 PERFORMANCE ORDER

1. If screen wipers work too slowly, first of all check level of a charge of the battery (see. Head of Control and routine maintenance). At the serviceable battery remove the electromotor of a drive of screen wipers (see below) and try to move brushes manually, checking freedom of their moving. In case of need make the corresponding repair of drafts and grease axial knots. Establish the electromotor into place, include ignition and again start brushes. If speed of work of screen wipers after the brought corrections did not settle into shape, check quality of contact connections of a chain and reliability of fixing of sockets, special attention having given to a grounding condition. At a serviceable chain replace the electromotor.

2. At refusal of activation of screen wipers check a condition of the corresponding safety lock. If a safety lock as it should be, establish a wire crossing point between the plug of grounding of the driving electromotor and mass of the chassis. Repeat check. If now screen wipers start to function normally, restore reliability of contact knots of grounding. If the motor still does not work, transfer the switch of management of brushes to a mode of the maximum speed (HI) and check tension existence on the socket of the conducting connected to the electromotor.

For ensuring access to the socket it is necessary to remove the panel of a forward fairing (see. Head Body) and electromotor assembly.

If tension takes place, check the motor by direct connection to the battery by means of the wire crossing point equipped with a safety lock. If now the motor functions, check a condition of driving drafts of screen wipers. If the motor is not started, replace it. If tension is absent, check serviceability of giving of a food on the relay of management of functioning of screen wipers. In the presence of tension on the relay and absence it on the motor check serviceability of functioning of the switch (see. Section Check of serviceability of functioning and replacement of podrulevy switches). If the switch as it should be, most likely, failed the built-in control unit which diagnostics should be made in the conditions of car repair shop with use of the special equipment.

3. At violation of serviceability of functioning of screen wipers in an interval mode check a chain condition on a site between the switch and the built-in control unit. If conducting as it should be, check resistance of the handle of management of duration of a delay on the combined switch (see. Section Check of serviceability of functioning and replacement of podrulevy switches). At the serviceable handle it is necessary to make diagnostics of the built-in control unit in the conditions of car-care center.
4. If brushes stop in that situation which they occupy at transfer of the switch to the situation OFF, check serviceability of giving of a food on the terminal switch of the electromotor. Tension should take place on the corresponding wire of the socket of the motor at the switch translated in the situation OFF and included (ON) ignition, otherwise check on break electroconducting on a chain site between the electromotor and a safety lock.
5. If the stop of brushes occurs only after ignition switching off, disconnect electroconducting from the switch of management of functioning of screen wipers. If now brushes stop, replace the switch. If brushes continue to function, therefore, the limiting switch of the electromotor is damaged, - replace the motor.
6. If brushes at a stop do not leave under the cowl plane, check driving draft on existence of extraneous subjects under it. If nothing disturbs leaving of brushes in parking situation, check electroconducting on a chain site between the switch and the motor. In the absence of breaks replace the motor.

Electromotor replacement

 PERFORMANCE ORDER

1. Remove levers (leads) of cleaners of a windscreen.

2. Uncover a forward fairing (see. Head Body).

3. Remove from a fairing driving assembly of screen wipers.

4. Turn out bolts of fastening of the motor to driving assembly.

5. Remove the electromotor.
6. Disconnect from the motor electroconducting.
7. Installation is made upside-down.