Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
+ electric equipment Schemes





Replacement of lamps of head headlights

Flasks of lamps of halogen type are filled with the gas which was under pressure and at sharp stirring can blow up. Try to take such lamps only for a socle and use goggles. Remember that at a flask contact naked fingers on glass there are fatty spots that leads to a premature exit of a lamp out of operation as a result of an overheat. Before installation wipe a lamp flask alcohol.


 PERFORMANCE ORDER

1. Open a cowl.
2. For an otpuskaniye of a clamp compress the socket case behind a lamp.

3. Turn assembly of the boss with a lamp counter-clockwise (looking at a block headlight behind).

In case of need previously remove a broad tank of system of cooling of the engine (at replacement of a lamp of the right head headlight on 4-cylinder models and left - on the V6 models).

4. Take a cartridge with a lamp from the block headlight case.
5. Having pulled on itself, take a lamp from the boss.
6. In case of need carrying out replacement of the boss disconnect from it electroconducting.
7. Trying not to touch a flask with naked fingers, plant a new lamp in a cartridge, then fill assembly in a block headlight for what track correctness of combination of uvulas of a clamp with grooves in the headlight case. After assembly input in a landing opening turn it for fixing clockwise against the stop.
8. Connect electroconducting and check serviceability of functioning of a block headlight.