Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle/cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of a latch of the lock of a cowl and cable of its drive

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. Head Onboard electric equipment). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

Latch

 PERFORMANCE ORDER

1. Lead round latch assembly by a marker or a chertilka for the purpose of a guarantee of correctness of its installation at assembly. Release clamps and remove plastic facing of a latch. Turn out from the panel of a support of a radiator fixing bolts and remove a latch.

2. Disconnect from latch assembly a cable of an otpuskaniye of the lock.

3. Installation is made upside-down.

Adjust the provision of a latch so that the cowl was reliably fixed by the lock in a closed position - rubber pillows of support should be flattened slightly.

Driving cable

 PERFORMANCE ORDER

1. Disconnect a driving cable of an otpuskaniye of the lock of a cowl from latch assembly.
2. Tie up by the end of the released cable a piece of a string and liberate a cable from intermediate clamps and directing.
3. Remove a loker of protection of an arch of a wing (see. Section Removal and installation of forward wings).

4. In salon of the car remove the main and forward sections of an overlay of a threshold of a driver's door.

5. Turn out two fixing bolts and separate from a partition the lever of an otpuskaniye of the lock of a cowl. Disconnect a cable from the lever.

6. Push through a partition the rubber plug through passage and involve cable assembly in car salon. Make sure that assembly of a new cable is equipped with the plug through passage. Untie an old cable from a string and tie up instead of it replaceable.
7. Involve assembly of a new cable for a wire through a partition in an impellent compartment.
8. Connect a new cable to the lever of an otpuskaniye of the lock, having tracked reliability of its fixing in a basic arm.
9. Further assembly make as it should be, the return to a dismantle order.

Fingers densely push the plug of a cable through passage into a partition of an impellent compartment (from salon) - track correctness of landing of the plug in a partition.