Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle/cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of rear-view mirrors

External mirrors

 PERFORMANCE ORDER

1. On the models equipped with the electric drive of external mirrors, remove the panel of an internal upholstery and the vlagozashchitny screen of a door (see. Section Removal and installation of panels of an internal upholstery of doors).
2. Having hooked a screw-driver, remove the triangular decorative panel of internal furnish of basic knot of a mirror.
3. At the corresponding complete set disconnect from a mirror electroconducting.

4. Turn out three fixing bolts and remove mirror assembly from a door.

5. Installation is made upside-down.

Internal mirror

 PERFORMANCE ORDER

1. Having pushed mirror assembly down, liberate a basic part of its arm from the assembly bracket pasted on a windscreen.

The arm is fixed in a bracket by means of a spring clamp which in case of need should be hooked a screw-driver.

2. If removed, fill into place a spring clamp. Develop mirror assembly under 90 ° and fill a basic part of its arm in an assembly bracket of the basis on glass. Push assembly top, then develop it in regular situation. Make sure of reliability of fixing of assembly in an assembly bracket.