Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle/cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of door glasses

Glasses of forward doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the vlagozashchitny screen (see. Section Removal and installation of panels of an internal upholstery of doors).
2. Completely lower glass.

3. Raise glass so that access to its fixture through openings specially provided in a doorframe opened.

4. Cover with rags the upper edge of glass, then give two fixing bolts.
5. Take glass from door assembly through a window aperture.
6. Installation is made upside-down.

The main and motionless flew down back doors

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door and the vlagozashchitny screen (see. Section Removal and installation of panels of an internal upholstery of doors).
2. Lower glass so that access to bolts on the directing opened. Weaken bolts and, holding glass, push directing back. Having liberated glass from directing, accurately lower it in the bottom situation.

3. Liberate an internal sealing strip from a doorframe and a back trench, having provided with that a necessary weak point for trench extraction. Liberate from a door an external sealing strip, having provided possibility of a reversing of the top screw of a trench.

4. Delay directing trench of glass forward, having separated it the fixed glass, then take a trench from a door at the top and leave hanging on a sealing strip (not to damage a paint and varnish covering of the door panel, cover the last with an old towel).
5. Now the main glass can be taken from a doorframe through a window aperture.
6. Afterwards, in case of need it is possible to remove the fixed glass of a door, - act carefully as glass can appear planted rather hardly.
7. Installation is made upside-down. If the sealing strip does not manage to be planted rather hardly, use special cementing structure. Till cement hardening the strip can be fixed by means of an adhesive tape.

Before tightening screws of fastening of the main glass, densely plant it in forward directing a trench.

The back fixed window leaves (Compartment model)

 PERFORMANCE ORDER

Performance of replacement of the back fixed window leaves demands from the performer of certain skills and experience and it should be entrusted to specialists of car-care center.