Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of overlays of forward and back bumpers
   Removal and installation of forward wings
   Removal, installation and adjustment of a cover of a luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of a latch and external handle/cylinder of the lock of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of a forward fairing
   Removal and installation of seats
   Removal and installation of the back shelf
   Geometrical sizes of various options of execution of a body
+ Onboard electric equipment
+ electric equipment Schemes





Driving cables of an otpuskaniye of locks of a cover of a luggage compartment and door of the hatch of a jellied mouth of a fuel tank

Cable of an otpuskaniye of the lock of a cover of a luggage compartment

 PERFORMANCE ORDER

1. The description of procedures of removal of a latch of a cover of a luggage compartment and a detachment from it a driving cable is provided in the Section Removal and installation of a latch and the cylinder of the lock of a cover of a luggage compartment.

2. In luggage take a spare wheel, then remove the left lateral panel of furnish with a ware pocket for the purpose of ensuring access to a tip of a cable of a drive of an otpuskaniye of the lock of a cover of the hatch of a jellied mouth of a fuel tank. Turn a cable tip on 1/4 turns with the purpose and take from door assembly.

3. Remove the lower part of a back seat (see. Section Removal and installation of seats). On models of the Compartment remove also a back of a back seat.
4. Having hooked, remove overlays of thresholds of doors from the driver's party of the car (on Compartment models a door one). On 4-cylinder models remove the bottom panel of furnish of the left central rack.
5. Unbend a carpet, having provided access to a driving cable of an otpuskaniye of the lock. Release all intermediate clamps of conducting of a cable.
6. Having hooked, open the top cover of the zamkovy cylinder in a casing of the lever of a remote otpuskaniye of the lock near a driver's seat. Insert a key into the lock and sharply turn it counter-clockwise, then take a key together with the cylinder from assembly.
7. From lateral face of the lever of a remote otpuskaniye of the lock remove a small plastic cover and weaken the bolt located under it (use a face key, having pushed its head through an opening under installation of the zamkovy cylinder. Shift a lever casing back for removal it from a bolt.

8. Overturn a casing and take a cable cover from a clamp, and a core tip - from the lever.

9. Tie up by the cable end a string piece.
10. Involve cable assembly in a luggage compartment so that the string tied up by its end seemed.
11. Tie up a string to a tip of a new cable and stretch assembly in regular situation, having connected it to the lever. Further assembly is made as it should be, the return to an order of dismantle of the corresponding components.