Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of the top control lever of a forward suspension bracket

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding forward wheel. To Poddomkratta the car also establish it on props. Remove a wheel. Prop up the bottom lever of a suspension bracket a jack.
2. Remove shock-absorber assembly with a screw spring (see. The section Removal and installation of assembly of the forward shock-absorber with a screw spring). Remove from the top lever of a suspension bracket an arm of the wheel ABS sensor.

3. Take шплинт and weaken a koronchaty nut of a spherical finger of a support of the top lever. Do not remove while a nut finally in order to avoid spontaneous separation of the lever from a rotary fist.
4. With the help 2-захватного a stripper separate the top lever of a suspension bracket from a rotary fist. Remove a koronchaty nut (try not to allow fist losses, in case of need tie up assembly by a wire).
5. Turn out axial bolts of the top control lever and remove assembly of the top lever from the car.

6. Installation is made upside-down. Track observance of demanded efforts of a tightening of fixture. Remark. Do not forget to replace шплинт fixing of a koronchaty nut of a spherical finger (see. The remark to paragraph 3 of the Section Removal and installation of a rotary fist).