Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of the forward stabilizer of cross-section stability

 PERFORMANCE ORDER

1. Cock the parking brake. Weaken nuts of fastening of forward wheels. To Poddomkratta a car front also establish it on props. Remove wheels.

2. Disconnect from a bar of the stabilizer of cross-section stability both racks.

3. Turn out bolts of collars of fastening of a bar of the stabilizer to the car bottom.

4. Take a bar of the stabilizer of cross-section stability from under the car.
5. Remove from a bar fixing collars and attentively examine rubber plugs on existence of cracks, signs of hardening and material aging. Defective plugs are subject to replacement. Check also bar racks on existence of signs of weakening of landing of tent hinges and other damages of the mechanical plan. Replace defective components.
6. Installation is made upside-down.