Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of the steering pump

 PERFORMANCE ORDER

1. For the purpose of minimization of losses of hydraulic liquid press submitting hose of the steering pump.
2. On the V6 models uncover the inlet pipeline.

3. Disconnect from the pump submitting hose and the pressure head line. Pay attention to distinction between hoses of the submitting and pressure head lines, the first fastens to the pump by means of a collar of spring type whereas shtutserny connection of the second is equipped with two bolts. In order to avoid hit in dirt system at once закупорьте the open ends of the disconnected lines.

1 — Bolts of the pressure head line
2 — the Collar of the submitting line
3 — the Adjusting bolt

1 — Bolts of the pressure head line
2 — the Collar of the submitting line

4. Turn out fixing and adjusting bolts of the steering pump. Remove the pump.

5. Installation is made upside-down. At connection of the pressure head line replace a sealing ring of shtutserny connection. Do not forget to remove on termination of procedure air from steering system (see. The section air Removal from a hydraulic path of system of strengthening of a wheel) and to adjust effort of a tension of a driving belt (see. Head of Control and routine maintenance).