Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of tips of steering drafts

REMOVAL

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding wheel. To Poddomkratta a car front also establish it on props. Remove a wheel.
2. Holding a draft tip from a provorachivaniye the second key, release a lock-nut. Unscrew a nut so that there was a possibility to put a label of provision of a tip on open rounds of a carving of a bar.

3. Take шплинт and weaken a nut of a spherical finger of a tip. It is not necessary while finally to remove a nut.

4. With the help 2-захватного a stripper liberate a sharovy finger of a tip from the lever of assembly of a rotary fist. Remove a nut and separate draft from a fist.

5. Turn on and remove from draft a tip.

INSTALLATION

 PERFORMANCE ORDER

1. Screw on draft a new tip (to the landing label put in the course of dismantle on rounds of a carving of a bar). Plant a sharovy finger of a tip in the lever of a rotary fist. Do not tighten while a tip lock-nut.
2. Screw a koronchaty nut of a spherical finger and tighten it with demanded effort. Fix a nut new the shplinty.
3. Strongly tighten a tip lock-nut.
4. Establish a wheel, lower the car on the earth and tighten wheel nuts with demanded effort (see. Specifications to Head of Control and routine maintenance).
5. Drive away the car in a specialized workshop for check and adjustment of corners of installation of forward wheels.