Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Removal and installation of assembly of the forward shock-absorber with a screw spring

REMOVAL

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding wheel. To Poddomkratta a car front also establish it on props. Remove a wheel.
2. To Otboltita a flexible brake hose from shock-absorber assembly.
3. Disconnect a bar of the stabilizer of cross-section stability from the bottom lever of a suspension bracket (see. Section Removal and installation of the forward stabilizer of cross-section stability).

4. Get a telezhechny jack under the bottom lever of a suspension bracket, having provided it a support at the removed assembly of the shock-absorber. Turn out a coupling bolt of a fork.

5. Give a nut and take a through bolt of fastening of a fork to the bottom lever of a suspension bracket.

6. Remove a fork. In case of need for separation of a fork from the shock-absorber обстучите its hammer with soft the brisk.

7. Having propped up shock-absorber assembly, give five nuts of its top support. Take assembly from under the car through a wheel arch.

INSTALLATION

 PERFORMANCE ORDER

1. Get shock-absorber assembly with a screw spring through a wheel arch on the regular place. Accurately pass fixing hairpins in openings of the top support in an arch mudguard. At once screw on nut hairpins, having tightened them while only by hand.

In view of considerable weight of amortizatorny assembly it will be reasonable to secure with the help of the assistant.

2. Fill the bottom end of the shock-absorber in a dempferny fork. Track hit of a directing uvula from a reverse side of the case of the shock-absorber in a reciprocal groove of a fork.
3. Connect a dempferny fork to the bottom lever of a suspension bracket. Tighten with demanded effort a fixing nut, then tighten with demanded effort a nut of a coupling bolt of a fork.
4. Connect to the bottom lever a bar of the stabilizer of cross-section stability (see. Section Removal and installation of the forward stabilizer of cross-section stability). Fix in the arm on shock-absorber assembly a flexible brake hose. Strongly tighten an arm bolt.
5. Establish into place a wheel, then lower the car on the earth and tighten wheel nuts with demanded effort (see. Specifications to Head of Control and routine maintenance).
6. Tighten with demanded effort of a nut of the top support of amortizatorny assembly.