Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly
   Removal and installation of a rotary fist
   Removal and installation of assembly of a forward nave with the wheel bearing
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of a pushing bar of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of the top control lever of a forward suspension bracket
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of stupichny assembly of a back wheel
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of reechny transfer
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Suspension bracket and steering

Specifications

General parameters

Suspension bracket type
Lobby The 2-lever
The back Independent, 5-lever
Steering type The Reechny mechanism with the hydraulic amplifier
Type of hydraulic PAS liquid See. Head of Control and routine maintenance
Corners of installation of wheels
Convergence of wheels, mm
Forward wheels 0
Back wheels 20
Disorder of wheels
Forward wheels
Models 1.6, 1.8 (except KY) and 2.0 l 0 ° 00'
Models of 1.8 l of KY 0 ° 08'
Models of 2.2 l - 0 ° 15'
Back wheels
Models 1.6, 1.8 (except KY) and 2.0 l - 1 ° 00'
Models of 1.8 l of KY - 0 ° 49'
Models of 2.2 l - 1 ° 15'
Corner of a longitudinal inclination of an axis of turn of a wheel (forward wheels)
Models 1.6, 1.8 (except KY) and 2.0 l 2 ° 50'
Models of 1.8 l of KY 2 ° 44'
Models of 2.2 l 2 ° 59'
Efforts of a tightening of carving connections N • m
Forward suspension bracket
Coupling bolt of a dempferny fork 43
Nut of a through bolt of fastening of a dempferny fork to the bottom control lever of a suspension bracket 64
Internal axial bolt of the bottom control lever of a suspension bracket 64
Nut of fastening of a pushing bar to a cross-section beam 43
Bolts of fastening of a pushing bar to the bottom control lever of a suspension bracket 161
Nuts of fastening of the shock-absorber to a body
8 x 1.25 16.3
10 x 1.25 50
Nut of a rod of a damper 30
Nut of fastening of a rack of the stabilizer of cross-section stability 39
Bolts of fixing collars of the stabilizer of cross-section stability 30
Nut of the bottom spherical support 49 ÷ 58
Nut of the top spherical support 39 ÷ 47
Nut of a basic arm of the sensor of speed of rotation of a wheel 9.5
Back suspension bracket
Internal axial bolt of the bottom lever 58
Nut of a bolt of fastening of the bottom lever to stupichny assembly 58
Nut of an internal axial bolt of a control lever of a suspension bracket 54
Nut of fastening of a control lever to stupichny assembly 58
Bolt of fastening of the longitudinal lever to the chassis 58
Bolt of fastening of the forward longitudinal lever to stupichny assembly 58
Internal axial bolt of the back longitudinal lever 58
Bolt of fastening of the back longitudinal lever to stupichny assembly 58
Internal axial bolt of the top lever 58
Koronchaty nut of fastening of the top lever to stupichny assembly 49 ÷ 58
Stupichny nut 188
Nut of a rod of a damper 30
Nut of fastening of a rack of the stabilizer of cross-section stability 39
Bolts of collars of fastening of the stabilizer of cross-section stability 30
Bolt of fastening of the shock-absorber to stupichny assembly 58
Top nuts of fastening of shock-absorbers 50
Safety cushion
Bolts of fastening of the module of a safety cushion (with TORX type heads) 9.7
Steering
Coupling bolt of an intermediate shaft of a steering column 22
Bolts of fastening of the steering pump 22
Bolts of the hydraulic PAS lines 10.8
Nut of fastening of a steering wheel 39
Bolts of fastening of assembly of reechny transfer 38
Fixture of an intensifying plate
Small bolts 38
Big bolts 43
Nut of fastening of a tip of steering bent for to a rotary fist 43

Components of a forward suspension bracket

1 — the Pushing bar
2 — shock-absorber Assembly with a screw spring
3 — the Bottom spherical support
4 — Nizhny a control lever

5 — the Tip of steering draft
6 — the Bar of the stabilizer of cross-section stability
7 — Assembly of reechny transfer


Components of a back suspension bracket


1 — the Bar of the stabilizer of cross-section stability
2 — the Back longitudinal lever
3 — the Control lever
4 — the Top lever

5 — shock-absorber Assembly with a screw spring
6 — Nizhny the lever
7 — the Forward longitudinal lever


Elements of a back suspension bracket

1 — the Forward longitudinal lever
2 — a stabilizer Bar
3 — the Lever
4 — Nizhny the lever

5 — the Back longitudinal lever
6 — the Fist
7 — the Amortization rack


Forward suspension bracket completely independent with top and bottom levers, shock-absorbers with screw springs and the stabilizer of cross-section stability.

In a back suspension bracket longitudinal levers (forward and back), two bottom control levers of unequal length (one is called as simply bottom lever, by the second - a control lever), the top control lever and assemblies of shock-absorbers with screw springs are used. The bar of the stabilizer of cross-section stability connects among themselves the right and left parties of a suspension bracket, compensating that body rocking.

All models are completed with the reechny steering mechanism with the hydraulic amplifier. In system of hydrostrengthening of a wheel (PAS) the steering pump connected to a case of the reechny mechanism by means of flexible hydraulic hoses is used given to rotation from the engine.

Often in the course of service of components of a suspension bracket it is necessary to face fixture resistant to an otdavaniye.“ By Prikipaniye” elements of fixture it is connected with that they are constantly subject to external influences, are in contact to water, dirt, a soot and other promoting development of corrosion by substances. For the purpose of simplification of procedure of an otdavaniye of its such "become attached" fixture it is necessary to impregnate with plentiful amount of getting oil beforehand. Cleaning of open carving parts of fixture by a rigid wire brush also promotes simplification of an otdavaniye of prirzhavevshy nuts. Sometimes, in especially hard cases, for an otpuskaniye "become attached" bolts/nuts it is possible to use a drift. The drift rests against the region of a shliyets of a nut/head of a bolt, then sharp blows are struck to its opposite end with a hammer. Watch that the drift did not break, try not to damage in inexact blows a carving. Quite effective way is also warming up of fixture resistant to an otdavaniye and a surface of a component surrounding it a torch of a blowtorch or a gas torch though originators of this Management and do not recommend to resort without extreme need to such technology in view of its potential danger connected with possibility of ignition and risk of receiving burns. Different extension pieces, collars and trumpet nozzles are intended for increase in a torque at an otpuskaniye of fixture on them. However, remember that it is not necessary to use such intensifying adaptations complete with the drive equipped with "graggers" - the risk of failure of the ratchet mechanism is too great. Sometimes the nut/bolt starts to give in after previously will be slightly tightened clockwise. All fixture, which otpuskaniye demanded application of extraordinary measures at assembly is subject to replacement!

After an otdavaniye attentively check a condition of fixture and in case of need make its replacement with elements of the same standard size. At assembly tighten fixture of components of a suspension bracket and a steering it is strict with demanded effort.

At all do not undertake attempts of a rikhtovka of the deformed components of a suspension bracket and a steering - replace defective details new!

As procedures of service of components of a suspension bracket are carried out under the car, it is necessary to take care in advance of possibilities of lifting of a vehicle and its fixing in the lifted situation (prepare reliable a jack and props).

At all do not perform any works under the car, fixed in the lifted situation only by means of a jack!