- Honda Accord brand cars
Identification numbers of the car
Acquisition of spare parts
Technology of service, tool and workplace equipment
Poddomkrachivaniye and towage
Security system of an audio equipment
Engine start from the auxiliary power supply
Automobile himikaliya, oils and greasings
Diagnostics of malfunctions of knots and car systems
- Governing bodies and operation receptions
Elements of systems of safety of the car
Car equipment, arrangement of devices and governing bodies
+ Settings and routine maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ electric equipment Schemes
Systems of heating, ventilation and air conditioning
At the correct use of possibilities of systems of heating and ventilation in salon of the car comfortable conditions of stay are provided and the zapotevaniye of glasses is excluded.
If the car upon purchase was not equipped with air central air, it can be mounted and established during any time convenient for the owner, at any time establish this system on the car, address on Honda company car repair shop.
Control panel functioning of systems of ventilation, heating and air conditioning
Handle of a choice of a high-speed mode of the fan
Handle rotation on a chasovoystrelka leads to increase in frequency of rotation of the fan and, therefore, intensity of supply of air in car salon. Transfer of the handle to extreme right situation leads to fan shutdown.
Handle of a regulator of air temperature
Handle rotation clockwise leads to increase in temperature of the car of air arriving in salon.
Switch of the conditioner of air
The A/C button is intended for inclusion and switching off of the conditioner of air. At turning on of the conditioner the control lamp built in the button lights up.
Switch of heating of back glass
The button of the switch is also equipped with the built-in control lamp which is lighting up at inclusion of heating.
The switch of a mode of the closed air circulation
By means of this button inclusion of a mode of the closed air circulation in car salon is made. The button is equipped with the built-in control lamp. At mode inclusion the salon of the car is isolated from the atmosphere and inflow to it fresh air stops. The fan provides air circulation on the closed contour. By repeated pressing the button (the control lamp should go out), supply of fresh air in salon will renew.
Handle of switching of the directions of distribution of air
The handle is intended for a choice of a mode of distribution of air on salon.
External air arrives in salon via the central and lateral ventilating deflectors of the dashboard.
Supply of air via lateral deflectors of the dashboard is carried out in all modes. The general scheme of distribution of an air stream is presented on an illustration.
External air arrives in salon at the same time via the central and lateral ventilating deflectors in the control panel, and also through the bottom ventilating openings which provide supply of air in driver's and passenger foot wells.
Supply of external air only driver's and passenger foot wells is carried out.
External air arrives in salon at the same time through nozzles обдува a windscreen, built in in the control panel from above near the bottom edge of glass, and through the bottom ventilating openings of foot wells.
External air arrives on having blown in a windscreen through the nozzles which have been built in in the control panel from above near the bottom edge of glass.
Management of deflectors of ventilating lattices
Nozzles of the central air lines of the dashboard are equipped with the special zhalyuziyny deflectors, allowing to regulate a deviation of a submitted air stream both in horizontal, and in vertical the planes. Management of deflectors is carried out with the help встроенныхв a lattice snuffled rychazhok.
Lattices of lateral air lines of the dashboard have a similar design. Besides, possibility of full interruption of supply of air through them is provided.
Instructions on use of systems of ventilation, heating and air conditioning
Below detailed maintenance instructions of systems of heating, ventilation and air conditioning are provided in various climatic conditions. Information on is presented to attention of the reader how to provide effective ventilation, in car salon, and also how quickly to remove heating and air cooling from glasses the kondensant and hoarfrost.
All considered systems function only at the started engine. As a working body for a heater cooling liquid of the engine is used. If the engine is not heated-up to normal working temperature, some minutes before in salon warm air will start to move is required. Work of central air of air does not depend on temperature of cooling liquid of the engine.
In absolute majority of cases the best efficiency of functioning of the systems providing a comfortable microclimate, is reached in a giving mode in salon of external air, inclusion of a mode of the closed circulation, especially at the idle conditioner of air, leads to a zapotevaniye of glasses and increase of a spertost of air therefore it is recommended to include this mode only in case of need and for rather short time, for example, at movement on the district with the filled with smoke or polluted atmosphere. As soon as need of isolation of salon will disappear, giving in salon of fresh air should be renewed.
External atmospheric air arrives in heating and conditioning systems through the reception lattice located before a windscreen and equipped with a fairing. Periodically clean openings of a reception lattice from leaves and the other garbage complicating passing of air.
The system of a supply and exhaust ventilation provides air in car salon. The fresh air arriving through a forward reception lattice, circulates on salon and then is removed through the exhaust outlets located near back glass:
а) Turn the handle of a regulator of air temperature counter-clockwise against the stop. Check, that the conditioner of air was switched on.
Ь) Establish the handle of switching of the directions of supply of air in situation. The mode of the closed air circulation should be switched off.
с) By means of the handle of a choice of a high-speed mode of the fan establish demanded intensity of supply of air in salon.
Air cooling in car salon
1 Cooling of salon is made as follows:
а) Turn on the air conditioner, having pressed the A/C button, - the control lamp built in the switch should light up.
b) Check, that the handle of a regulator of air temperature was turned in extreme left situation.
c) Establish the handle of switching of the directions of supply of air in salon.
d) At high humidity of external air include a mode of the closed circulation, at low humidity - a mode of inflow of fresh air;
е) By means of the handle of a choice of a high-speed mode of the fan establish demanded intensity of supply of air in salon.
2 If the car staid a long time on the sun and air in salon strongly heated up, quickly to reduce temperature in salon as follows:
a) Start the engine;
b) Turn on the air conditioner (A/C button). Check, that the handle of a regulator of air temperature was turned in extreme left situation;
c) By means of the handle of a choice of a high-speed mode of the fan establish the maximum intensity of supply of air in salon;
d) Partially slightly open windows and turn the handle of switching of the direction of distribution of air in situation. Include a mode of inflow of fresh air.
After air temperature in salon will decrease to acceptable level, close windows and establish a normal mode of air conditioning
Work of central air of air leads to increase of load of the car engine therefore it is necessary to watch closely an arrow of the index of temperature of cooling liquid, moving with frequent stops and on small speed in the conditions of an intense city cycle, or overcoming long liftings of a considerable steepness. At approach of an arrow of the index to a red range of a scale, temporarily switch off the air conditioner until the temperature of the engine will not return to norm.
Heating of salon of the car
To lift air temperature in car salon, execute the following manipulations:
a) Start the engine;
b) Establish the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation should be switched off;
c) By means of the handle of a choice of a high-speed mode of the fan establish demanded intensity of supply of air in salon;
d) Turning the handle of a regulator of air temperature in that or инуюсторону, establish desirable degree
Salon heating with simultaneous drainage of air by means of the conditioner
At central air work humidity of air in salon of the car decreases, therefore simultaneous inclusion of systems of heating and conditioning allows to make air in car salon warm and dry.
a) Turn on the fan;
b) Turn on the air conditioner;
c) Establish the handle of switching of the direction of distribution of air in situation. The mode of the closed air circulation should be switched off;
d) Pororachivy the handle of a regulator of air temperature in this or that party, establish desirable degree of heating of air arriving in salon. In this mode cold air from the conditioner mixes up with warm air from a heater.
Joint inclusion of systems of heating and air conditioning can be applied in any traffic conditions, when temperature surrounding 0°С.
Removal from condensate and hoarfrost glasses
To clear internal surfaces of glasses of the condensed moisture it is possible as follows:
a) Turn on the fan;
b) At the corresponding complete set of the car turn on the air conditioner;
c) Establish the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation should be switched off. Some options of execution of the car provide possibility of automatic inclusion of a mode of supply of fresh air and its conditioner by installation of the handle of switching of the directions of distribution of air in situation
d) Turn the handle of a regulator of air temperature in such situation that warm air moved through nozzles обдува a windscreen;
e) Include an electroheater of back glass for faster removal of the condensed moisture from its surface. On some options of execution of the car if the handle of switching of the directions of distribution of air is in any situation except, the conditioner of air remains included. For switching off of the conditioner press the А/С button.
To remove from an external surface wind and lateral glasses hoarfrost or the ice formed after parking of the car on the street in frosty weather, execute the following manipulations:
a) Include ignition, повернувключ in the lock in the situation "ON" (II);
b) Establish the handle of switching of the directions of distribution of air in situation. The mode of the closed air circulation should be switched off. Some options of execution of the car provide possibility of automatic inclusion of a mode of supply of fresh air and the conditioner, by installation of the handle of switching of modes of the direction of distribution in situation;
c) Turn the handle of a regulator of air temperature in an extreme pravoyepolozheniye (the maximum heating of air) and turn on the fan for the maximum speed;
d) Start the car engine.
For acceleration of cleaning of a windscreen from hoarfrost or ice it is recommended to include a mode of the closed air circulation in very cold weather at first. After the windscreen will be released from fly, renew supply of fresh air for the purpose of prevention of a zapotevaniye of glasses.
In a mode обдува glasses all submitted to salon of air arrives through the slot-hole nozzles located from above on the dashboard at the basis of a windscreen, and also via lateral ventilating deflectors of the dashboard. Air temperature, обдувающегостекла, and speed of purification of glasses increase in process of engine warming up. For acceleration of process of removal from a windscreen of condensate, hoarfrost or ice it is possible to close lateral ventilating deflectors. In this case all air will go only on having blown in a windscreen.
For reasons of safety it is not necessary to begin movement until all windows of the car will not be cleared of condensate, and to the driver the adequate review will not be provided.
Switching off of systems of heating and ventilation
In order that it is temporary отключитьсистемы heating and ventilation, turn handles of regulators of a high-speed mode of the fan and air temperature in the extreme left provisions.
Need for shutdown of systems arises in the first some minutes after engine start in cold weather as it provides faster warming up of the engine to temperature, sufficient for effective functioning of a heater. In all other cases keep the fan constantly included in avoidance of a stagnation of air in salon.
Climate control system
The system of climate control can enter into a standard complete set of some models and carries out functions of management by ventilation, отопленияи air conditionings in salon. The heater and the conditioner of air provide maintenance of the set air temperature. Besides, the system climate-kotrolya automatically carries out a choice of a high-speed mode of the fan and makes distribution of distribution of air depending on the set temperature.
The direction of streams of the air arriving in salon from the central and lateral ventilating snuffled, it can be adjusted manually, by means of mobile deflectors of lattices, - rychazhka of management are located deflectors in the middle of ventilating lattices. At desire, supply of air via lateral deflectors of the dashboard can a bytpolnost is stopped.
System functioning in an automatic mode
The control panel functioning of systems of heating, ventilation and air conditioning on the models equipped with system of climate control
1 — the regulator Handle температурывоздуха / the button of inclusion of an automatic mode функционированиясистемы climate control
2 — the Button of management of fan functioning
3 — the switching off Button автоматическогорежима
4 — the Switch of the conditioner of air
5 — the Switch of a choice of rezhimazamknuty air circulation
6 — the Button of switching of a rezhimovraspredeleniye of air
7 — the heating Switch заднегостекла
Transfer of system of climate control to an automatic mode of functioning by a nazhimaniye on the AUTO button on the dashboard. Rotation of the handle of a regulator of temperature establish desirable air temperature. On the screen of the display of system "FULL AUTO" inscription should be highlighted. The control lamp informs the operator on inclusion/switching off of a mode of the closed circulation.
The system automatically creates an optimum combination arriving via the conditioner and/or the heat exchanger of a heater of air streams, providing the fastest warming up or air cooling in salon to the set temperature.
For the fastest warming up or air cooling in salon include a mode of the closed air circulation and turn the handle of a regulator of temperature one of extreme (left or right) provisions, - it is thus established top (32°С) or bottom (18°С) a limit of adjustable temperature. If a regulator of air temperature will turn in one of extreme provisions, the system will work in a constant mode, without being switched off, and warming up/cooling air with the greatest possible efficiency. Thus the system does not supervise the current air temperature in car salon. If the handle of a regulator to establish in one of promezhutochnypolozheniye, the system will automatically support the set air temperature in car salon.
The fan automatically turns on in cold weather only after the engine worked some time and a heater is ready to heating of air.
Shutdown of system of climate control is carried out with the help кнопк by "OFF". The system should not be in the disconnected condition a little long time. In order to avoid stagnation of air and emergence of unpleasant smells it is recommended to keep in salon constantly the fan the included.
System functioning in a semi-automatic mode
There is a possibility of manual inclusion of any of functions of system of climate control when it works in an automatic mode. Automatic control of all other functions of system thus remains. Vzhimaniye transfers to any of buttons of management system to a semi-automatic mode, - the control lamp which has been built in the AUTO button, and "FULL" inscription on the display should go out.
The conditioner joins and switched off by means of the A/C button. The condition of the conditioner is reflected by the corresponding inscription in the display: "ON" (Is included) or "OFF" (Is switched off). At manual turning on of the conditioner the system of climate control does not provide cooling of the air arriving in salon, to temperature ambient temperatures are lower. At the working conditioner expose comfortable value of temperature of air submitted to salon by means of the handle of the corresponding regulator.
The button with the image of the pictogram is intended for inclusion and switching off of a mode of the closed air circulation. If the control lamp built in this button burns, therefore, in system the air closed in volume of salon of the car constantly circulates. If the control lamp is switched off, means, receipt in salon of fresh air from the outside which is possible previously in climate control system to the set parameters takes place. There is a possibility of manual inclusion of a mode of the closed circulation, for example, at an entrance in a zone with the filled with smoke or polluted atmosphere, - at inclusion of a mode the control lamp built in the button lights up.
The button with the image of a krylchatka allows to regulate speed of rotation of the fan manually. By the first pressing the button the fan passes from an automatic mode in manual and starts to rotate with the minimum speed. Each subsequent pressing the button leads to step-by-step increase in speed of rotation of a krylchatka. The current level of a high-speed mode of the fan is reflected in the control panel display in the form of a comb. On reaching a maximum level the next pressing the button transfers the fan to a mode of the minimum speed.
The MODE button is intended for switching of the directions of distribution of air on car salon. By each pressing the button there is a switching of modes in a certain sequence that is displayed by highlighting of the corresponding pictograms on the panel display management. For viewing of all possible modes it is necessary to press the button four times:
a) Air поступа t in salon
at the same time through nozzles обдува wind and the lateral glasses, the dashboards located on the top shelf, and also through the bottom ventilating openings;
Ь) The main part of air arriving in salon moves in driver's and passenger foot wells through the bottom ventilating openings;
c) Air arrives in salon at the same time via the central and lateral deflectors in the dashboard, and also through the bottom ventilating openings;
d) The main part of air arrives via the central and lateral deflectors of the dashboard.
By pressing the button with the pictogram image the main part of air arriving in salon moves on having blown in a windscreen, than its fast defrosting is provided. This button has a priority and cancels previously the set mode of distribution of air.
By pressing the button with the pictogram image the air conditioning mode with its inflow from the outside automatically joins. For faster effective удаленияинея or fly from a windscreen, choose the maximum speed of rotation of the fan. Supply of air on having blown in a windscreen it can be increased at the expense of a perekryvaniye of the lateral snuffled. The repeated pressing the button returns system in a former operating mode.
The button of heating of back glass serves for condensate and hoarfrost removal from back glass of the car.
Sensors of sunlight and air temperature
The structure system of climate control includes two information datchika:datchik of sunlight established from above to the dashboard, and the sensor of air temperature close to a steering wheel. Try not to put from above on the sensor any subjects and do not allow hit on them any liquids.
As a rule, the audiosystem is not a part of a standard complete set of the car and is established as the additional equipment.
The firm audiosystem provides purity of sounding in all ranges of frequencies and differs simplicity of switching off of favourite radio stations by means of keys of preliminary control.
Cassette a deck it is supplied with system of a shumopodavleniye of Dolby, automatic detection of installation chrome-dioksidnoy of a magnetic tape and the function of an automatic reversion providing possibility of continuous reproduction of records from both paths of a tape without reinstallation of an audiocassette.
The used Dolby system made on the licenses Dolby Laboratories LicensingCorporation. "Dolby" DD, and also the pictogram are the registered trademarks of the DolbyLaboratories Licensing Corporation company.
The audiosystem functions, when the ignition key is in the provision of "ASS" (I) or "ON" (II). In the first provision of a key a food of auxiliary consumers of the electric power joins, in the second - ignition and a food of all consumers of the electric power is included. For inclusion of an audiosystem press a narukoyatka of "PWR" or the button of switching of radio ranges. Adjustment of level of loudness is made by PWR handle rotation.
At audiosystem inclusion on the display of the control panel of a radio tape recorder the indicator of the chosen radio range and value of frequency of a radio signal on which the radio receiver before food switching off was adjusted is highlighted. To pass to other radio range, press the button of switching of ranges. At radio receiver inclusion in a range of U/FM and its control for radio station which broadcasts in a stereophonic mode, on the display the ST indicator (Stereo) is highlighted. If the car got to a zone of uncertain reception of a stereosignal, the ST indicator starts to blink.
Possibility of stereophonic reception of broadcasts in other ranges is absent.
In any of three ranges the radio receiver allows to make control by four ways: manually (TUNE), semi-automatic (SEEK), automatically by range and control (SCAN) scanning or automatic control for previously chosen radio stations, which frequencies are brought in memory of a radio receiver.
Manual control (функцияTUNE) is made by means of the TUNE key. Press the right or left part of the TUNE key respectively to change frequency of control of a radio receiver towards reduction or increase respectively. By pressing and key deduction in the pressed situation frequency of control начинаетизменяться it is continuous. The current frequency of control of a radio receiver is reflected in the display of the control panel of a radio tape recorder. Release the TUNE key as soon as the receiver will be adjusted on the necessary frequency. To change frequency of control for one discrete step, shortly press and release the TUNE key.
The mode of semi-automatic control (SEEK function) is provided also. At inclusion of this function the radio receiver finds in the current range radio station with a strong signal and is independently adjusted on it. For inclusion of radio receivers a mode of search it is necessary to press and hold the right or left part of the SEEK key. Radio station search will occur to rather strong signal in bottom or top поддиапазоне rather current frequency of control of a radio receiver, depending on on what part of a key the nazhimaniye is made. Search stops, as soon as the receiver finds the first radio station with a strong signal.
At inclusion of function automatic control of scanning of a range (Scan Function) the radio receiver finds all radio stations with rather powerful signal излученияв the current range. For radio receiver inclusion in a mode of scanning of a range it is necessary to press and release the SCAN button. Search of radio stations will occur to a strong signal in all chosen range. At identification of a signal of demanded intensity search stops, and within about five seconds the radio receiver accepts a radio signal on this wave. If during this time no buttons are pressed, the radio receiver passes to further scanning of a range and search of the following radio station with a strong signal which will accept also within about five seconds. If during scanning of a range the signal from station to which you would like to listen further was found, press once again the SCAN button.
Radio receiver control for previously chosen stations. By means of six buttons marked with numbers from 1 to 6, it is possible занестив memory of a radio receiver of frequency of favourite radio stations. In a type A stereoradio tape recorder each button allows to program on one radio station in each range. The design of a stereoradio tape recorder of type B allows by means of everyone изшести buttons to fix one frequency in a radio range of AM and two frequencies in FM range (on one in поддиапазонах FM1 and FM2). To program memory of a radio receiver, execute the following operations:
a) By means of the corresponding button choose a demanded range of radio frequencies;'
b) By means of the TUNE key, SEEKили SCAN adjust a radio receiver on desirable radio station;
c) Choose for this radio station one of six buttons of programming of memory, press and hold it until will hear a short sound signal;
d) Repeat operations with the first on the third to bring in memory of a radio receiver of frequency of six radio stations;
e) Now it is enough to press any of six buttons of programming of memory of a radio receiver that it was automatically adjusted on previously chosen station which frequency of a signal is brought in the corresponding cell of memory.
6 Frequencies of preliminary settings of a radio receiver are erased from memory at failure (the strong category or battery room shutdown батареиа also at extraction of a safety lock of an audiosystem.
Automatic programming of memory of a radio receiver
At considerable removal from the location of transferring stations the radio receiver cannot accept more signals on the frequencies chosen earlier. Thus there is a possibility fast (in an automatic mode) reprogrammings of memory of system on signals of local stations.
For inclusion of function of automatic programming of memory press the A.SEL button, - on the display of the control panel of a radio tape recorder the A.SEL indicator will light up. The radio receiver within several seconds will scan all ranges and will bring in memory of frequency of stations with the strongest signal.
The radio receiver remembers to six stations in VHF range (стереоманитола type A) or six stations in a range of AM and twelve stations in FM range (a type B stereoradio tape recorder). The subsequent control of a radio receiver for the programmed stations is carried out in the regular way by means of buttons with numbers from 1 to 6.
If the car is on considerable removal from the developed network of radio stations, the receiver can not обнаржить enough of local radio stations with a strong signal to fill all available cells of memory (12 or 18). In this case by pressing the button of preliminary control corresponding to a free cell of memory, on the display of the control panel the indicator "0" will light up
At inclusion of a mode of avtomaticheky programming it is possible to program manually some cells of memory by means of control buttons.
It should be noted that at inclusion of a mode of automatic programming there is no deleting from memory of a radio receiver of frequencies of stations earlier brought in it. After return home press the A.SEL eще button of times to switch off a mode of automatic programming of memory. Thus by means of buttons of preliminary control access to frequencies which were programmed initially is provided.
System of radio data of RDS (only for type A autoradio tape recorders)
Autoradio tape recorders of type A give opportunity to use the developed service functions of system of radio data of RDS.
RDS button. If the radio receiver works in U (FM) range, it can automatically be recustomized on frequencies of the various regional radio stations transferring the same program, in a long journey it избавитВас from need periodically to change setup of the receiver and provides high quality of reception of transfer.
Functions of reception of information of RDS become more active automatically at radio tape recorder inclusion. If the radio station on which the radio receiver is adjusted, broadcasts in the RDS standard, on the display of the control panel of a radio tape recorder instead of frequency of a signal there will be a name of accepted radio station. If the program is at the same time transferred on several frequencies, the radio receiver will automatically choose and will be adjusted on that frequency on which the best quality of reception (the strongest signal) is provided. These RDS functions relieve you of need to recustomize a radio receiver if you are in the region with the developed network of RDS radio stations.
At car removal from transferring RDS station on distance where the signal cannot be accepted surely any more, the receiver remembers the last frequency of control and deduces its value on the display instead of the radio station name.
To switch off the radio receiver RDS function, press and hold pressed the TPA/RDS button not less than two seconds. Thus "RDS" indicator on the display of the control panel will go out.
TR indicator. At control of a radio receiver for RDS station which works in a mode of transfer of road messages, on the display the TR indicator automatically turns on. Road messages are transferred by such stations periodically or as required in intervals or during translation of other radio programs in U (FM) range. Therefore, if on the display of the control panel of a radio tape recorder the TR indicator burns, you can hear operational road information.
TRA function. To find RDS station which works in a mode of transfer of road messages, shortly (no more than two seconds) press the TPA/RDS button. Thus on the display of the control panel of a radio tape recorder the TRA indicator will be highlighted. If the radio receiver is already adjusted on the station working in a mode of transfer of road messages (on the display "TR" indicator burns), it will continue to work as before. In case the receiver is adjusted not on TR station, or a TR station signal insufficiently strong, in 70 seconds will work a sound warning signal. Then every 30 seconds the radio receiver will include warning signal until TRA function will not be switched off by repeated short-term pressing the TPA/RDS button. The warning buzzer will be disconnected at control of a radio receiver for other TR station by means of the handle of "TUNE", the SEEK buttons or buttons of preliminary control.
During reproduction of records on an audiocassette or a compact disc, you also can hear operational road information. At in ((((on the display the TRA indicator burns) and control радиоприемникана a wave of TR station which works врежиме transfers of road messages (at the display the TR indicator burns), reproduction of records with аудиокассетыили a compact disc automatically interrupts as soon as translation of road information begins. During reception of road messages on the display the TRF-INFO indicator burns. Besides, loudness of a sound is automatically established on previously set level irrespective of the current position of the handle of a regulator of loudness.
After the completion of translation of road information the radio tape recorder revolves record reproduction from an audiocassette or on a compact disc.
PTY function. At short (less than two seconds) pressing the button of "PTY" the PTY function joins. This function allows to learn type or a genre of the program which is broadcast by radio station. For example, if record of performance is transferred, on the display of the control panel of a radio tape recorder the DRAMA indicator will be highlighted. Translation of discussions of any scientific problem is accompanied by SCIENCE indicator highlighting, etc. If the RDS radio station does not transfer data on a genre of the broadcast program, on the display there is a NONE indicator.
In that case when the radio receiver is adjusted not on RDS station, on the display the NO RDS indicator lights up. Thus the PTY function is automatically switched off and the display reverts to the original state (in the absence of other teams).
At the included PTY function you can use "TUNE" or "SEEK" keys quickly to find radio station which transfers the program of the genre necessary to you. By pressing the TUNE or SEEK keys on the display the messages designating various genres of broadcasts, for example, to "NEWS" (News), "AFFAIRS" (Business), "INFO" (Information), "SPORT" (Sports) etc. will be highlighted. As soon as on the display there will be a designation of the genre necessary to you, quickly (is more short than two seconds) press "PTY" button. The radio receiver will join in a mode of automatic search of transfer of the set genre. If at present transfer of the chosen genre is not broadcast by any station, on the display "NO PTY" message is deduced. Six seconds later the NO PTY indicator dies away, and the mode of automatic search of radio station on the set genre of the program is switched off.
The mode of automatic search of radio stations on the set genre of the broadcast program is switched off also in case after a choice of the necessary genre of transfer (by means of the TUNE handle or the SEEK buttons) within five seconds any button was not pressed.
Indicator of prime reception of news. When keeping the PTY button pressed within more than two seconds the mode of prime reception of news joins. Thus on the display there will be a message of "NEWS" (News). In this mode the radio receiver will accept first of all headline news from all radio stations, regardless of chosen before the program (transfers of road messages of TR do not interrupt only).
EON indicator. If transfer of headline news is carried out by radio station, distinct from that on which your radio receiver was adjusted, on the display EON message is highlighted.
Stereobalance adjustment front/back. The design of the control panel of an autoradio tape recorder allows to adjust separately loudness of sounding of the left/right and forward/back loudspeakers of the speaker system. In the first case the stereobalance, in the second - balance the front/back is regulated.
Sound adjustment The stereobalance and balance the front/back are regulated by means of the BAL/FAD button. The pressing of a key changes an adjustment mode from stereobalance on balance the front/back, then, rotating a ring regulator of "PWR", adjust loudness of sounding of the left/right and forward/back loudspeakers of the speaker system.
Adjustment of a timbre of sounding. Tembrovy coloring of a sound is regulated спомощью the TREBLE/BAS buttons. Nazhimany on the button makes switching of modes of adjustment of low and high frequencies. Then, rotating a ring regulator of "PWR", adjust voluntarily a sound timbre in a range of low and high frequencies. Further, rotating a ring regulator of "PWR", adjust voluntarily a sound timbre in a range of low and high frequencies.
The scheme of an arrangement of governing bodies from a magnetic tape on the forward panel of a radio tape recorder is presented by reproduction of records on illustrations.
Include a radio tape recorder, having pressed the PWR button. Develop an audiocassette so that its party with an open site of a magnetic film was on the right. Then insert the cartridge into a reception window decks. The audiocassette should enter into a reception window almost completely then there is an automatic loading of a magnetic tape into position and record reproduction begins.
The indicators executed in the form of arrows, directed up and down, and the control panels of a radio tape recorder located on the display, show the direction of movement of a magnetic tape and number of a lost path. To replace a path and pereklyuchitnapravleny movements of a film with the return, press the PLAY button (Reproduction).
Function of an automatic reverse provides possibility of continuous playing of an audiocassette: on reaching the film end cassette a deck automatically switches the direction of rewind of a film to the return. Record from the second path of magnetic Lena thus is reproduced.
The mode of suppression of noise of Dolby joins automatically at once after cartridge introduction in a reception window decks. If record on the cartridge was carried out without use of a mode of a shumopodavleniye, disconnect this mode on a player, having pressed the button with the pictogram image.
Cartridge extraction from decks is made by means of the EJECT button.
Function of search of a musical fragment
Design decks a predusmatrivayetvozmozhnost of search of the necessary record during playing of magnetic recording. Search is made by means of buttons of fast rewind of a tape of "FF2", REW", "RPT" or "SKIP".
Fast rewind of a film forward and back. Two FF buttons and "REW" are intended for inclusion of modes of fast rewind of a magnetic film forward and back. Quickly to rewind a film back, press the REW button. Rewind forward is carried out by means of the FF button. Thus on the display of an autoradio tape recorder the indicator representing the corresponding letters will light up. For a stop of fast rewind of a film forward or it is necessary to press the PLAY button back. If in a mode of fast rewind the end of a magnetic tape is reached, the direction of rotation of the cartridge automatically changes naobratny and record reproduction begins with other path of a film.
Mode of the admission (SKIP). The mode of the admission allows to pass the song or a record fragment on an audiocassette film. For inclusion of a mode of the admission press the SKIP FF or SKIPREW button, depending on what piece of record gather propustit:predshestvuyushchiya to this moment of reproduction, or following it. If you want to return by the beginning of a song or a fragment of record which are reproduced at present, press the SKIP and REW buttons at the same time. Thus on the display for the period of return rewind of a film a poyavitsyaizobrazheniye of letters of "REW". If you want to pass by the beginning of the following song or a record fragment, press at the same time the SKIP and FF buttons. Thus on the display for the period of rewind forward there will be an image of letters of "FF". When the system will find the beginning of the following record on a film, the reproduction mode automatically will join.
Repeated reproduction of record. This function allows to repeat reproduction of the same record automatically repeatedly. Function joins by pressing the RPT button. At the same time on the display of the control panel of a radio tape recorder "RPT" inscription will be highlighted. On reaching the end of the current record fast rewind of a film back for the beginning of this record automatically joins. The player will continuously reproduce the same record until the RPT button will not be repeatedly squeezed out.
Realization described above service functions of the admission and repeated reproduction of record is based on use of free intervals between separate fragments of record on a magnetic tape. These service functions can incorrectly work, if duration of pauses between separate records is too small, or level of a noise background in pauses is excessively great. Besides, in the presence of inside fragment of pauses, they will be perceived by a player, as the intervals separating separate records on a magnetic tape.
Care of a radio tape recorder
In use autoradio tape recorders the magnetic head cassette decks gradually becomes soiled deposits of a dust and particles of a magnetic layer showered from a film. At considerable pollution of a magnetic head quality of a sound at reproduction of records worsens. In view of told, it is necessary regularly, through each 30 business hours decks, to make cleaning of a magnetic head.
The negligent relation to care of a radio tape recorder and violation of the stipulated schedule of cleaning of a magnetic head can lead to a situation when removal of the accumulated deposits by means of the ordinary cleaning cartridge will appear impossible.
The design decks provides possibility of automatic unloading of an audiocassette which for any reasons cannot normally be reproduced. If the cartridge jumps out even prior to the beginning of reproduction, it speaks about its possible damage, it is not necessary to make attempts of repeated loading of such cartridge. There can sometimes be a stop of reproduction of a sound recording, single or double turning on of the mechanism of a reverse decks, or cartridge unloading. Usually similar phenomena occur owing to mechanism jamming, or as a result of unevenness of resistance to rewind of a magnetic tape on cartridge coils. In this case it is necessary to take an audiocassette and manually to waste a tape on some turns of the coil.
Cassette a deck of an autoradio tape recorder it is calculated on use of audiocassettes with duration of record to 100 minutes. Use of more capacious cartridges with a thin magnetic film can lead to refusal decks or film deformations.
Attentively examine an audiocassette before inserting it into a reception window decks. If the magnetic film has a considerable weak point, tighten it, rotating a coil nave in the relevant party by means of a pencil or fingers.
At an otslaivaniye of a label glue it or remove completely. Otherwise, the lagged behind sticker can lead to cartridge jamming in attempt to take it from decks. Do not insert into a reception window decks the pognuty or broken audiocassette.
Do not leave an audiocassette in such places where they are exposed to influence of high temperature or high humidity, for example, on the top shelf of the dashboard or in the most cassette a deck, do not insert the peregrety or overcooled cartridge into a radio tape recorder until its temperature is not normalized.
Do not insert into a reception window cassette decks extraneous subjects.
Remote control audiosystem functioning
The top and bottom buttons of the panel allow to regulate loudness of a sound, increasing it, - the button (tt), or reducing, - the button (uu). Press the corresponding button and hold until loudness of a sound will not reach desirable level.
The panel consists of three buttons and allows to make management of radio tape recorder functioning without a separation рукот a steering wheel.
The AUDIO/CH button (Switching of operating modes of an audiosystem) carries out three functions of that is listened at present time: a radio receiver, magnetic recording, or record from a compact disc.
When listening radio receiver the AUDIO/CH button allows to be switched to other radio stations. Each time by button pressing a radio receiver is switched on following of brought in memory of the receiver of stations in the chosen range of frequencies. Thus on the display of the forward panel of a radio tape recorder the image of number of the chosen radio station is highlighted. For transition to other range of frequencies press the button of switching of the radio ranges, located on the forward panel of a radio tape recorder.
At reproduction of magnetic recording, the pressing of the AUDIO/CH button carries out transition to the following record on a film. At the moment of button pressing on the display of the forward panel of a radio tape recorder the blinking inscription of "FF" is highlighted. The pause on a magnetic tape will be passed, and the system will pass to reproduction of the following record.
If compact disc listening the AUDIO/CH button allows to carry out transition to record reproduction from the following path. Thus on the display of a stereoradio tape recorder disk and path number from which record is reproduced is highlighted.
Security system of an autoradio tape recorder
On the models equipped with similar system the detachment for any reasons of an audiosystem from the power supply leads to its blocking. To unblock system, it is necessary to enter a five-place code by means of buttons of control of a radio receiver on previously chosen stations. As there are hundreds thousands such combinations, to unblock system, without knowing the correct code, it is almost impossible.
At audiosystem installation on the car the owner receives a special card with a code and serial number of a stereosystem. Originators of the real Management insistently advise to store a card in a safe and reliable place. Bring serial number of an audiosystem in a notebook and store it together with other documents out of the car. The new card instead of the lost can be received at firm car repair shops of the Honda company upon presentation of serial number.
In case of the category or a detachment of the storage battery inevitably there is an audiosystem blocking. In this case at system inclusion on the display of the forward panel of a radio tape recorder the inscription "Code" (Code) is highlighted. By means of buttons of control enter a demanded five-place code. If the code is entered correctly and identified by an audiosystem, it starts to function in a usual mode.
If at input of a code the mistake is allowed, do not try to correct it in repeated pressing of buttons, - before stop to enter an erroneous combination, and only then enter the correct code. For code introduction you have ten attempts. If during ten attempts to gather the correct code it was not possible, repeated attempts can be undertaken not earlier than in hour.
After an unblocking of system it is necessary to program anew memory of a radio receiver on reception are loved hradiostantsiya as at a detachment from a food there is a cleaning of memory of an audiosystem.