Honda Accord

1998-1999 of release

Repair and car operation



Honda Chord
- Honda Accord brand cars
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Security system of an audio equipment
   Engine start from the auxiliary power supply
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions of knots and car systems
   - Governing bodies and operation receptions
      Access, protection
      Elements of systems of safety of the car
      Car equipment, arrangement of devices and governing bodies
      Comfort
      Operation receptions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes





Car equipment, arrangement of devices and governing bodies

Arrangement of governing bodies

1 — Left podrulevy the switch (the main switch of management of functioning of external lighting and alarm devices)
2 — the Regulator of management of intensity of illumination of the dashboard
3 — Right podrulevy the switch (the switch of management of functioning of cleaners/washers of glasses)
4 — the Switch of the alarm system
5 — the Switch of heating of back glass
6 — Hours with digital indication
7 — the ignition Lock

8 — the Control panel functioning темпостата on a steering wheel

9 — the Remote control
audiosystem functioning
10 — the Switch of fog lights
11 — the hydroadjustment Switch
directions of optical axes of head headlights
12 — the Switch back foggy
lamps
13 — the Switch темпостата

 


Arrangement of governing bodies (continuation)

1 — management Switches функцио
electric drive nirovaniye
adjustments of provision of mirrors
rear view
2 — the management Switch функцио
electric drive nirovaniye
top hatch
3 — the Switch of internal lighting
salon
4 — the Control panel функционирова
niy heater/conditioner
air
5 — the Audiosystem

6 — a RKPP/selector A Control lever
7 — the Lever of a drive of unlocking of the lock
doors of a back/cover of the luggage
offices
8 — the Lever of a drive of unlocking of the lock
hatch of a jellied mouth toplivno
го tank
9 — the Lever of a drive of unlocking of the lock
cowl
10 — management Switches функцио
nirovaniye electric drive
window regulators


Scheme of an arrangement of control lamps of a combination of devices

1 — the Control lamp of a charge
2 — the Control lamp of pressure of oil
3 — the Control lamp of system of an immobilization of the engine
4 — the Control lamp of violations of serviceability of functioning of systems of the engine
5 — the Control lamp of inclusion of a driving beam
6 — the Control lamp of raising lay brakes/refusals of brake system
7 — the Control lamp of SRS
8 — the Control lamp of inclusion темпостата

9 — the Control lamp emergency
alarm systems (or a control lamp "Fasten belts")
10 — the Control lamp of ABS
11 — the Control lamp of a reserve stock of fuel
12 — the Control lamp of leaky closing of doors
13 — the Control lamp leaky
closing of a cover of a luggage compartment
14 — Control lamps of indexes of turns

Combination of devices

Control lamps

The whole complex of control lamps by means of which the driver receives an important nformatsiya about serviceability/violation functioning of the main units and car systems is built in assemblies of measuring instruments of a combination of devices of the car. The scheme of an arrangement of control lamps on an instrument guard is presented on an illustration. Below information on a principle of functioning of each of the provided light indicators separately is offered to attention of the reader.

Control lamp of a charge of the accumulator


The control lamp of a charge should light up at inclusion of ignition and
to die away right after engine start. Inclusion of this control lamp at the working engine предупрежда ет the driver about violation of serviceability of functioning of system of a charge, the storage battery passes to a category mode. It is necessary to switch off at once everything consumers of the electric power on which functioning safety of traffic does not depend and to try not to allow останова the engine as attempt of its start can lead to the final category of the battery. The car should be driven away at once on the next car repair shop for carrying out diagnostics of refusal and performance of necessary regenerative repair.


Control lamp of pressure of impellent oil

The control lamp of pressure of impellent oil should light up privklyucheniya of ignition and die away right after engine start. The lamp blinking at the working engine testifies about pulsatsionny snizheniirabochy pressure of engine oil a vdvigatel. Indicator transition in a rezhimpostoyanny luminescence speaks about that, the chtodavleniye of oil fell to dangerously low level that is fraught with serious internal damages of the engine, up to its full exit out of operation. In both cases follows predprinyatsrochny measures for adjustment уровнямасла, to identification and elimination of a prichinpadeniye of pressure.


Control lamp of systems of an immobilization of the engine

This control lamp is provided only on as appropriate equipped models. Should light up quickly at ignition inclusion. The blinking of a control lamp testifies that the identifying device of system of an immobilization of the engine did not identify a code of a microchip of the ignition key and start of the engine is impossible. A control lamp начинаетмигать also at transfer of the ignition key to provisions ASS and LOCK.


Control lamp of violations of serviceability of functioning of systems of the engine

The control lamp quickly lights up at ignition inclusion. Its operation during any other time testifies to possible malfunction of one of engine systems, including systems of decrease in toxicity of the fulfilled gases. In the absence of visible signs of refusals of functioning of systems of the power unit and decrease in dynamics of the vehicle, fixed by inclusion of a control lamp of violation the increase in fuel consumption or increase of toxicity of emissions can be at the bottom. Ignoring of signals of a control lamp is fraught with serious damages of the engine, up to a unit exit out of operation. At operation of a control lamp under way follows immediately prekratitdvizheny, to park in a safe place and to muffle the engine, then, later small time, to make start, watching thus behavior of a control lamp. If the lamp not вернуласьв a normal mode of functioning also continues to burn, the car should be driven away on the next car repair shop for carrying out detailed diagnostics and performance of necessary regenerative repair. Before elimination of malfunction of systems of the engine try to move with moderate speed, avoiding sharp dispersals with complete squeezing of a pedal of gas.

Even if at engine restart the control lamp comes back to a normal mode of functioning (i.e., dies away), it is necessary to address at the first possibility for consultation on car repair shop, especially if such inclusions of a lamp occur not for the first time.

Continuation эксплуатацииавтомобиля with included kontrolnoylampy can lead violations of serviceability of functioning of systems of the engine to premature failure of the catalytic converter. Remember that on refusals and the damages which have resulted operation of the car with the included control lamp, guarantee certificates of manufacturer do not extend!


Control lamp of inclusion of a driving beam

This light indicator lights up at the same time with inclusion of a driving beam of head headlights of the car (see below).


Control lampavzvedeniya lay brakes/refusals of brake system

The control lamp continuously burns when raising the parking brake, reminding the driver of need of his otpuskaniye before a start of motion. Movement with the cocked parking brake leads to a fast overheat and failure of brake mechanisms of back wheels of the car and premature wear of protectors of tires of back wheels, but also, can become a cause of infringement of serviceability of functioning of system of anti-blocking of brakes (ABS) (see below).

If the control lamp continues to burn after an otpuskaniye стояночноготормоза, or joins in movement time, it usually testifies to excessive falling of level of brake liquid. One of the possible reasons of gradual decrease in level of brake liquid is normal wear of frictional overlays of brake shoes. At operation of a control lamp the car should be driven away on the next car repair shop for an assessment of a condition of blocks and check of tightness of a hydraulic path of brake system.
Short-term operation of a control lamp occurs also at ignition inclusion (even at the released parking brake).

Operation of this control lamp at the same time with a control lamp of ABS (at the released parking brake), or under way the car specifies malfunction existence in brake system of the car.


Control lamp of system of additional safety (SRS)

This control lamp lights up at inclusion of ignition and should die away right after implementation of start of the engine, if the lama continues to burn at the working engine (in a constant or flashing mode), it specifies existence of malfunction of components of SRS system, At the corresponding complete set operation of this control lamp can be the testimony of malfunction in contours of lateral safety cushions, or devices of automatic emergency natyazhitel of seat belts.


Control lamp of CRUISE of inclusion темпостата

At the corresponding complete set of the car this control lamp lights up at inclusion of system of automatic control by speed of movement of the car (темпостата) (see below).


Control lamp "Fasten belts"

On some models instead of this control lamp in a combination of devices the control lamp of the alarm system (see below) can be built in. This control lamp serves for a reminder to the driver and passengers about need to be fastened by seat belts. The driver forgot if to be fastened, the sound buzzer which is disconnected later rather short time in addition joins. The control lamp will continue to remain included until seat belts will not be properly fastened.

Operations of a control lamp and sound buzzer do not occur, if the driver was fastened before ignition inclusion.


Control lamp of ABS

At the corresponding complete set of the car this control lamp lights up at inclusion of ignition and dies away right after implementation of start of the engine, confirming with that serviceability of functioning of a contour of system of anti-blocking of brakes. Operation of a control lamp in any other situations testifies to identification by system of self-diagnostics of violations in ABS contour. The car should be driven away immediately on the next car repair shop for carrying out detailed diagnostics of system and performance of necessary regenerative repair.

At operation of a control lamp the system of anti-blocking of brakes is disconnected, however brake mechanisms of the car continue to function in a usual mode, providing a vehicle adequate braking.


Control lamp of a reserve stock of fuel

The control lamp joins, when in a fuel tank of the car there are less than 9.0 l of fuel and warns the driver about need urgently to make car filling.


Control lamp of leaky closing of doors

Burning of this control lamp warns the driver what not all doors of the car are densely slammed.


Control lamp of leaky closing of a cover of a luggage compartment

This control lamp warns the driver that the cover of a luggage compartment of the car is slammed leaky.

Control lamps of indexes of turn

Two control lamps in the form of arrows have a green luminescence and serve for control of serviceability of functioning of the corresponding indexes of turns. The direction of display arrows coincides with the chosen direction of a change of course of the car. Control lamps work in a flashing mode with the frequency corresponding to frequency of a blinking of indexes of turn. The speeded-up blinking of one of control lamps usually testifies to a peregoraniye of a lamp of one of indexes of the corresponding turn. It is necessary to make replacement of the burned-down lamp at the first possibility not to create emergencies on roads.

The simultaneous blinking of control lamps of indexes of both turns usually accompanies turning on of the alarm system.

On some models in an instrument guard the separate control lamp of the alarm system which is usually established instead of a control lamp "is built in fasten belts". In this case a control lamp of indexes of turns at turning on of the alarm system should not blink.

Indexes

Scheme of an arrangement of indexes of a combination of devices

1 — the Tachometer
2 — the Speedometer
3 — the Index of a stock of fuel
4 — the Measuring instrument of temperature of the engine

5 — the Odometer (the counter of a full distance in kilometers)
6 — the distance in kilometers Counter текущейпоездки / the index of temperaturynaruzhny air
7 — the Button of dumping of indications of schetchikatekushchy run

The scheme of an arrangement of indexes of a combination of devices is presented to an illustration.

Tachometer

The tachometer shows frequency of rotation of a cranked shaft of the engine in revolutions per minute. In order to avoid an exit of the engine it is out of operation forbidden to exceed the most admissible frequency of rotation of a cranked shaft (the arrow of a tachometer never should come into a red zone of a scale).

Speedometer


The speedometer shows speed of movement of the car. As a unit of measure the km/h usually serves, in certain cases on the dial of a measuring instrument two scales can be put: km/h and miles/h. Inoda can enter into a complete set of the car an alarm buzzer of excess of admissible safe speed of movement (120 km/h).

The index of level of fuel in a tank


The device registers the current amount of fuel in a tank. The error of indications of a measuring instrument is minimum, when the car is on an equal horizontal platform. At car movement on twisting or hilly roads the error of the device increases. At switching off of ignition of the shooter of the index passes to zero situation. Right after ignition key turn in the position "ON" (II) of the shooter of the index passes to situation, sotvetstvuyushchy to the actual amount of fuel in a tank.

Index of temperature of the engine


The device registers temperature of cooling liquid of the engine. The normal working temperature of the engine at car operation in obychnykhusloviya corresponds to the average provision of an arrow of the index. In heavy uloviya of operation, for example, in very hot weather or at long lifting uphill the arrow of the index can rise to the top red mark in a scale. If the temperature of the engine increased so that the arrow of the index comes into limits of a red range of a scale of a measuring instrument (N), it is necessary to stop immediately movement, having moved down on a roadside, to park the car, to make check of a condition of systems of cooling about clarification of the reasons of an overheat of the engine

Odometer


The odometer fixes the general run of the car in kilometers or miles, depending on execution option.

Counter of the current distance in kilometers run/index of temperature of external air

The counter registers the current run of the car from the moment of the last dumping of indications (in kilometers or miles, depending on execution option). Dumping of indications of the counter призводится by means of the special button which has been built in in an instrument guard is more right than speedometer assembly. On some models the display of the counter can be used for highlighting of data on temperature of external air. Switching of the display of a measuring instrument is made by the button mentioned above. At ignition inclusion on the display the last chosen indicators will be deduced.

Some of the Honda Accord models are equipped with two counters of the current distance in kilometers switching between which is carried out by consecutive pressing of the same button. For zeroing of indications any it is necessary to deduce them from counters on the measuring instrument display, then to hold the button of dumping pressed before emergence on the value "O" screen.

Zeroing of indications of measuring instruments occurs also at a detachment of the storage battery.

Main switch of management of functioning of external lighting devices

The main switch of management is executed by lighting in the form of the lever which has been built in in the left part of a steering column directly under a steering wheel.

For turning on of devices of external lighting turn the face handle of the lever of the main switch in the first fixed situation corresponding to the pictogram. Thus there will be an inclusion of lobbies and back marker lights, lamps of illumination of registration plate and dashboard illumination. For inclusion of a passing beam of head headlights it is necessary to turn the face handle of the main switch in the second fixed situation corresponding to the pictogram.

For the purpose of the prevention of the category of the storage battery inclusion of the warning sound signal working at opening of a driver's door in case lighting devices is provided are left included, and the ignition key will turn in the situation "ASS" (I) or "LOCK" (0).

Short-term switching of head headlights from a passing beam on distant also is back made by procrastination of the lever of the switch on itself. For continuous inclusion of a driving beam delay the lever on itself a doshchelchka, then release.

Short-term inclusion of a driving beam is made irrespective of, in what situation there is a rotary face handle of the main switch.
5 Some from models of cars considered in the real Management are equipped with system of automatic inclusion of running fires of light time of day (DRL). Day lighting joins and switched off automatically at ignition key turn in the situation "ON" (II), its switching off can be made by a way of turn of the face handle of the central switch of lighting to the first or second fixed situation.


Inclusion of indexes of turns

Inclusion of indexes is made by means of the lever of the main switch of lighting. The lever is transferred up or down, to dependences of the chosen direction of a change of course. At transfer of the lever to extreme top / bottom situation (before click) the corresponding indexes of turns will continue to function until the steering wheel will not be returned in rectilinear situation.

Short-term inclusion of indexes, for example, at intention to replace a ryadnost of movement is made by easy procrastination of the lever up or down, respectively.

Right podrulevy switch

Switch of management of functioning of cleaners of a windscreen


The rotary face handle of the switch is located on the end of the combined control lever screen wipers/washers of a windscreen of the right podrulevy switch. Three modes of functioning of screen wipers are provided:

a) When translating the face handle
in the first situation (INT) occurs
inclusion of an interval mode ра
boats of screen wipers;
b) The second situation (-) соответ
ствует continuous maloskorostno
му to a mode of functioning of brushes;
c) Choice of the third situation (=)
inclusion непрерыв is carried out
foot of a high-speed mode.

In an interval mode between running cycles of screen wipers pauses in some seconds which can change slightly depending on speed of movement of the car are maintained: between running cycles it is less than pause at movement of the car and more at its stops. In the second and third positions of the switch the screen wiper works continuously.

Possibility of fast start of screen wipers on some running cycles is in addition provided, - it is necessary to wring out the switch lever down. Thus стеклоочистительбудет to work with the maximum speed until the lever will not be released. This mode is convenient to that allows to restore quickly the adequate review through a windscreen, for example, after overtaking or travel with the counter car on the dirty and wet road.


Inclusion of washers of a windscreen

Inclusion of washers of a windscreen is made by procrastination on itself the lever of the right podrulevy switch. At procrastination of the lever there is an inclusion shipped in the tank of washing liquid of the pump, and through special nozzles on a windscreen liquid will start to move continuously. Supply of liquid stops at a lever otpuskaniye.

At the same time to supply of liquid usually there are some operations of screen wipers.


Switching off of cleaners and washers of lenses of head headlights

Initiation of cleaners/washers of lenses of head headlights occurs automatically at the same time to inclusion of washers of a windscreen provided that external lighting is included.

Liquid moves on lenses of headlights from this the tank, as on a windscreen.

Switch of the alarm light system

Turning on of the alarm system is made by an otzhimaniye of the push-button switch which built in in the central part of the dashboard of the car and has been usually equipped with an alarm lamp with the pictogram, representing two triangles entered each other.

Turning on of the alarm system leads to simultaneous operation of all four indexes of turns (and their control lamps on an instrument guard of the car) the Alarm system is intended for the prevention of other participants of traffic of the compelled stop of the car and is used also in other dangerous situations provided by traffic regulations.

Switch of electroheating of back glass

Inclusion of electroheating allows to remove from a surface of back glass of condensate, hoarfrost, and even thin fly. The button of inclusion is located in the central part of the dashboard of the car. At the same time with inclusion of an electroheater the light indicator which has been built in the button will light up. Shutdowns of heating it is made by repeated pressing the button.

On the models equipped with system of climate control the button of inclusion of heating can be вмонтированав the control panel a microclimate. Do not forget to check before a start of motion quality of the review through back glass of the car.

The threadlike grid of a heating element of a heater is pasted on an internal surface of back glass and demands care in the address - try not to damage a grid when wiping glass. Wiping should be made only along heater threads.

Switch of back foggy lamps

Initiation of back foggy lamps becomes possible only at the included head and/or forward fog lights (at the corresponding complete set). For inclusion of foggy lamps press the button of the switch built in in the dashboard. The control lamp reminding to the driver is built in the button that foggy lamps remain included. Shutdown of lamps is carried out by repeated pressing the button.

Foggy lamps are disconnected automatically together with head headlights.


Switch of fog lights

Fog lights can be included only at the included marker lights and are automatically disconnected at switching off of the last. For inclusion of fog lights press the button of the switch built in the dashboard. The control lamp reminding to the driver is built in the button of the switch that fog lights remain included. Shutdown of headlights is carried out by repeated pressing the button.


Regulator of brightness of illumination of the dashboard

Regulator of brightness of illumination it is built in in an instrument guard of the car to the seamstress of assembly of a speedometer (see an accompanying illustration). Demanded intensity of illumination of the panel is made by rotation of the handle of a regulator.


Regulator of correction of the direction of optical axes of head headlights of the car

The regulator provides possibility of correction of the direction of optical axes of radiation of head headlights in a mode of a passing beam and to achieve the best conditions of illumination of the road at various loading of the car.

2Регулировка it is made depending on number of passengers, existence and weight of cargo in a luggage compartment. It is necessary to transfer a regulator to the situation corresponding (or the most approximate) the actual loading of the car:

a) The situation "About" - one driver or the driver and the passenger on a forward seat;
b) Situation "1" - the driver and four passengers on forward and back seats;
c) Situation "2" - the driver, four passengers on forward and back seats, plus cargo in a luggage compartment (the full mass of the car is in limits of an admissible range);
d) Situation "3" - one driver and cargo in a luggage compartment (loads of forward and back axes of the car are in the admissible limits, the full mass of the car does not surpass the maximum admissible value).

On class R updatings correction of optical axes of headlights is carried out automatically in a mode of a passing beam.

Lever of a clamp of an adjustable steering column

See information concerning the correct and safe provision of a steering column (Undressed Elements of systems of safety of the car).

Situation the helmsman of a column on cars of the corresponding complete set can be adjusted at the discretion of the driver. Adjustment is carried out before a start of motion.

The helmsman of a column during movement can lead performance of correction of situation to control loss over management of a vehicle and can lead to serious road accidents!

To adjust the provision of a steering column on height it is necessary:

а) To lower the lever of a clamp of a steering column located at the left under a steering wheel against the stop;
b) Adjustment of provision of a steering wheel on height is carried out by a way moving it to demanded situation in the vertical plane. Correctly adjusted steering wheel should not block the review of an instrument guard;
с) On termination of adjustment fix a steering column, having completely lifted the clamp lever in a starting position;
d) Check reliability of fixing of a column, having tried to move it up and down.


The governing bodies located on a steering wheel

Control system of speed (темпостат)

The control system of speed (темпостат) enters in standard комплек a tatsiya of some models, on others can be established in addition. The system allows to support automatically the chosen cruiser speed of movement of the car without impact on a gas pedal. Cruiser speed should not exceed value of 40 km/h. Application темпостата becomes especially convenient at long movement on the low-loaded direct country highways. For the purpose of safety it is not recommended to include темпостат at movement in the city, on twisting, abounding with turns, to roads, on a slippery paving, in a heavy rain or at other adverse weather conditions. In the cases listed above the driver should have possibility completely to supervise a mode of movement of the car.

Misuse темпостата can be at the bottom of a road accident. Include a control system of speed only at movement on free highways and under favorable weather conditions.

During functioning of system there can be an automatic moving of a pedal of gas which thus should not be held a foot in order to avoid damage of basic and axial mechanisms.


Management of functioning темпостата

Press the button of the main switch темпостата which is located on the control panel under a steering wheel, - should light up built in the switch button контрольнаялампа.

Disperse the car till the demanded cruiser speed which value should not be less than 40 km/h.

Press and hold in the pressed situation the SET/DECEL button on control panels functioning темпостата, built in in assembly of a steering wheel. The button is necessary for holding pressed before inclusion on an instrument guard of a control lamp темпостата ("CRUISE CONTROL"). Operation of a control lamp testifies that the control system of speed got into gear and started to support the cruiser speed of movement of the car chosen by the driver.

It is necessary to mean that the actual speed of movement of the car during the various moments of time can slightly deviate the chosen value, especially when moving on the hilly district. At increase of speed of movement on descents следуетудерживать the car by squeezing of a pedal of a foot brake, - will occur thus shutdown темпостата for which repeated initiation it is necessary to squeeze out the SET/DECEL button (Installation/delay) and to hold its pressed before inclusion on an instrument guard of a control lamp of "CRUISECONTROL". When liftings, for preservation of the set high-speed mode, automatic transmission can be switched to a low gear.

Change of value by supported system of cruiser speed of movement of the car can be made by one of three described below ways:

а) Press and hold in the pressed situation the RESUME/ACCEL button (Restoration/acceleration), - the car should start to be dispersed smoothly. As soon as speed of movement of the car in the course of its dispersal will reach demanded value, release the withheld button;
b) Insignificant acceleration of the car can be made putemneskolky consecutive squeezings the RESUME/ACCEL buttons (Restoration/acceleration), each of which will lead to increase in speed of movement of the car at size of 1.6 km/h;
c) Press a pedal of gas and disperse the car till demanded speed, then squeeze out the SET/DECEL button (Installation/delay).

There are also some ways of delay of speed of movement of a vehicle:

a) Press and hold in the pressed situation the SET/DECEL button (Installation/delay), - thus the car should start to be slowed down smoothly. As soon as speed of movement of the car in the course of its delay will reach demanded value, release the withheld button;
b) Insignificant delay of the car can be made by a way of several consecutive squeezings the SET/DECEL buttons (Installation/delay), each of which will lead to decrease in speed of movement of the car on size 1.6km/h;
c) Quickly slightly squeeze out a pedal of a foot brake, - the control lamp built in in the dashboard "CRUISECONTROL" (Tempostat) thus should go out. As soon as speed of movement of the car will decrease to demanded value, press the SET/DECEL button (Installation/delay). Now the system will support the new chosen cruiser speed.

Even at included темпостате the driver can use still a gas pedal for dispersal of the car and overtaking implementation. After completion of overtaking remove a foot from an accelerator pedal, the car should return automatically to earlier chosen value of cruiser speed of movement.

Long squeezing of a pedal of a foot brake leads to shutdown темпостата.

Shutdown темпостата

Shutdown темпостата can bytproizvedeno one of three изложенныхниже ways:

а) Quickly squeeze out a pedal of a foot brake;

b) Press on built in впанель managements of functioning темпостата on a steering wheel the button, "CANCEL" (Cancellation);
c) Press the button of the main switch темпостата.

 

By pressing the CANCEL button (Cancellation) or on a pedal of a foot brake the control lamp built in in an instrument guard "CRUISE CONTF (Tempostat) should go out, the car thus will start to be slowed down. From this point the driver can continue management of a vehicle in a usual mode, manipulating a gas pedal. темпостата it is necessary to be stored in a memory the last chosen value of cruiser speed. To return to it, disperse the car from above 40 km/h, then squeeze out and hold pressed the RESUME/ACCEL button (Restoration/acceleration). This button should be held in the pressed situation before inclusion of a control lamp "CRUCONTROL" (Tempostat) then aвтомобиль will automatically reach speeds of the system of speed brought in memory which will be supported before introduction of further changes.

Squeezing of the button of the main switch темпостата leads to complete switching off of a control system by speed and memory zeroing.

Panel of remote control by audiosystem functioning

On some models of rassmatriyemy cars in the real Management in assembly of a steering wheel the panel of remote control is built in by audiosystem functioning. By means of buttons a part of the panel the driver can, without tearing off hands from a steering wheel, to choose demanded a mode of functioning of a radio tape recorder. Detailed instructions on an ispolzoniya of an autoradio tape recorder are provided In the Section operation Receptions.

Adjustment of seats

Forward seats


In the Section Elements of systems of safety of the car important information on safety issues and correctness of adjustment of seats, their backs and head restraints is stated.

Before a start of motion adjust the provision of a seat.

For adjustment of provision of a seat in the longitudinal direction raise the lever of a clamp located in front under a pillow of a seat and, holding him in the lifted situation, shift seat assembly forward or back in situation convenient for you, then release the lever. For check of reliability of fixing of a seat try to shift it forward and back.

To change a tilt angle of a back of a seat, raise the lever of a clamp located sideways on the basis of a pillow of a seat from a door, and holding him in the lifted situation, bring a back into convenient situation, then release the lever. Back fixing in new situation occurs automatically.

Some options of execution of the car provide possibility of adjustment of height of a pillow of a seat. Adjustment is made with помощьюрычага a clamp, which расположенслева on the basis of a seat pillow. Having delayed the lever up, a seat priveditepodushka in convenient situation, then lower the lever. Pillow fixing in new situation occurs automatically.


On some models the design of a back of a driver's seat allows to make also adjustment of provision of its lumbar part. Adjustment is carried out by means of the rotating handle located on a lateral surface of a back of a seat, from its internal party. On class R models adjustment of lumbar department of a back of a driver's seat is made by pumping. Pumping is carried out at the expense of a szhimaniye of a spring of the special air pump to pit air, press the release button.


Models with the electric drive of adjustment of provisions of a driver's seat


The electric drive of adjustment of provision of a driver's seat enters into a complete set of some models. The control panel with two switches is located electric drive functioning at the left on the basis of a seat pillow. The combined extended polzunkovy switch serves for adjustment of provision of a seat in the longitudinal and vertical directions. By means of the switch of the smaller size adjustment of an inclination of a back is carried out.

Adjustment of a seat can be made at any provision of a key in the lock of ignition and should be carried out prior to the beginning of movement.

For correction of provision of a seat in the longitudinal direction shift in the relevant party the extended polzunkovy switch on the control panel electric drive functioning.

Adjustment of height of provision of forward and back edges of a pillow of a seat is carried out by an otzhimaniye in the relevant party of the forward or back ends of the polzunkovy switch.

Adjustment of height of provision of a pillow is assembled made by shift up or down all polzunkovy switch.

Adjustment of an inclination of a back is carried out by means of the switch of the smaller size located behind the first extended switch.

Head restraints

Head restraints help to prevent injuries of a neck and the head at car blow behind. In order that head restraints could carry out effectively the protective functions, they should be adjusted correctly.

Adjust head restraints on height so that the top part of a pillow of a head restraint was flush with the upper edge of an auricle. If high passengers do not manage to achieve it, it is necessary to establish a head restraint in the highest situation.

On some updatings of the car possibility of adjustment of head restraints on height and a tilt angle is provided. Adjustment of provision of a head restraint is made by two hands at the same time therefore it is not necessary to try to adjust a head restraint during car movement. To lift a head restraint, simply pull it up, for lowering, press on it; change of a tilt angle of a head restraint is made by its bending back in the relevant situation.

Some options of execution of the car provide existence of a push-button clamp of a head restraint. At such design to lift a head restraint, it is rather simple to pull it up, lowering can be made only after an otzhimaniye of the button of a clamp.

Head restraint dismantle or replacement is made for cleaning as follows: lift a head restraint up against the stop, then press the button of a clamp and remove a head restraint from a seat back.

Electroheating of seats

On some models possibility of heating of forward seats is provided. Both lobbies of a seat are equipped with electric heaters which work only at the included ignition (the ignition key will turn in the situation "ON" [II]). Inclusion of heating is made by means of the corresponding push-button switch, - the control lamp built in in the button should light up. Shutdown of heating is made by a repeated nazhimaniye on the button.

Do not include heating of seats at the idle engine and try not to use it long time at operation of the engine on single turns in avoidance the category of the storage battery.


Back seat

Central armrest заднег seats


On some models the back sidnye is equipped with the central armrest. The armrest settles down in a tsetralny part of a seat and being displayed by extraction from a niche in a lowering back in the horizontal is put!


Folding of backs of a back seat

The back of a back seat has a separate design and consists of two parts which can develop впред, opening direct access to a luggage compartment and providing possibility of transportation of lengthy cargoes.

Each of two sections of a back of a zany seat can develop forward irrespective of another. To combine one of sections, open a cover of a luggage compartment and pull on itself a loop of the corresponding clamp.


For fixing of a back of a seat in vertical situation, press to the back ware shelf, make sure of reliability of fixing of a back in vertical situation, having pulled it on itself at the upper edge.

Track, that seat belts of a back seat at the lifted backs occupied the regular provisions.

Be convinced of reliable fixing of all located in a luggage compartment and subjects acting in salon. Remember that sharp braking can lead to any shift of unrecorded cargo.

Avoid car operation with the combined backs of a back seat and an open cover of a luggage compartment in order to avoid hit in salon of the car of the fulfilled gases containing toxic monooxide of carbon (WITH).

Electric drive of window regulators

On as appropriate equipped models the electric drive of window regulators functions only at the included ignition.

On each of doors of the car the switch intended for management of the electric drive of a regulator of a window regulator of this door is located. To lower glass, press down a key of the switch and hold her in the pressed situation until glass will not occupy demanded situation, the stop occurs at a key otpuskaniye. Lifting of glass is carried out at an otzhimaniye of a key of the switch up.

At the left on an armrest of a driver's door the central control panel is located functioning by the electric drive of window regulators of all doors of the car. To lower glass of any of passenger doors, wring out down a key of the corresponding switch and hold it pressed until glass will not occupy demanded situation. Lifting of glass is made by a key otzhimaniye up. For lifting of glass shift the corresponding button up and hold her in this situation. When glass will occupy the necessary situation, release the switch button.

Watch, that when closing glasses jammed to nobody fingers or the heads!

By means of the main switch the driver can disconnect food giving in a chain of the electric drive of window regulators of all passenger doors, having blocked thereby management from individual door switches. The main switch and blocking do not affect the electric drive of a window regulator of a driver's door. In transit children will need to be blocked window regulators of passenger doors.

The possibility, complete lowering of glass of a driver's door (and on some models - and complete closing) single is provided by squeezing of a key of the corresponding switch (an automatic mode). For lowering or a glass podnimaniye in an automatic mode with effort press a switch key in the corresponding direction. The stop can be made at any moment by a nazhimaniye way on the opposite side a key.

Partial lowering or podnimany glasses of a driver's door is made by easy pressing the relevant party of a key of the switch and its keeping of the pressed. Glass will stop, as soon as the key will be released. Automatic reversion mode (automatic return of glass to a starting position)

If glass of a driver's door rises in an automatic mode and on a way of its movement any obstacle meets, there is an automatic blocking of a window regulator after which glass will start to fall down to a starting position.

Even in the presence of this function, before use of window regulators it is necessary to make sure that anybody from passengers does not hold hands or the head put out in a window.

As a result of road accident there can be a spontaneous inclusion of a mode of an automatic reversion that is fraught with electric drive failure. In such situation the car should be driven away on stantsiyutekhobsluzhivaniye for performance of the corresponding recovery operations.

At refusal of an automatic mode (for example, as a result of the category of the storage battery or an exit of its izstroy) it is necessary to make the following actions at the working engine:

a) Press a key of the switch of a window regulator of a driver's door and hold its pressed dopolny lowering of glass;
b) Shift a key of the switch of a window regulator of a driver's door up and hold her in this situation before complete closing of glass, plus some more seconds;
c) Make sure of serviceability of functioning of window regulators in an automatic mode.

Top hatch

Management of functioning of electric drives of the top hatch is carried out by means of the switches which have been built in in the panel, close to the top salonny lamps. Into the panel enter: switch of a drive of longitudinal moving of the hatch (opening and closing) and switch of a drive of adjustment of an inclination of the hatch. Electric drives of the hatch function only at the included ignition (the ignition key vpolozheny "ON" [II] will turn). To open the ventilating hatch, shift the switch of longitudinal moving back, and on the contrary. Adjustment of a tilt angle of the hatch is made by means of the second switch, - the back edge of the hatch should rise. For reduction of a cover of the ventilating hatch in horizontal situation, it is necessary to shift forward the switch of longitudinal moving of the hatch.

The electric drive of the top hatch is capable to clamp and injure strongly got to a hatch aperture a hand or fingers! Before starting hatch closing, be convinced that anybody from passengers did not expose the head or hands in an aperture.

Attempt to open the top hatch at negative temperature of air or if the hatch is covered with a snow layer or ice, can lead to damage of a cover or the electric drive mechanism!


Rear-view mirrors

For the purpose of ensuring adequacy of the review of a zone behind the car it is necessary to support constantly purity and to check correctness of adjustment internal and external mirrors заднеговида. Before a start of motion, make sure that rear-view mirrors are adjusted properly.

Internal rear-view mirror

Two regular provisions of an internal rear-view mirror are provided: one is intended for movement during daylight hours, another - in dark. In the second situation reflecting ability of a mirror decreases that promotes weakening of blinding action of headlights moving behind vehicles. Transfer of a mirror of day situation in night also is back made by means of special, built in in assembly from below a rychazhka. Pressing a rychazhok forward or back, choose the demanded provision of a mirror.


Electric adjustment of external rear-view mirrors

The control panel is built in by functioning of the electric drive of external rear-view mirrors in an armrest of a driver's door, ahead of the control panel of window regulators. Adjustment of mirrors is made by means of polzunkovy and keyboard switches of the panel as follows:

a) Include ignition;
b) Moving a rychazhka of the polzunkovy switch to the left (L) or to the right (R) make a choice of a mirror subject to adjustment;
c) Pressing on the top, bottom, left or right sector of the keyboard switch, make correction of provision of the chosen mirror;
d) After the completion of adjustment of both mirrors transfer a rychazhok of the polzunkovy switch to average situation in which the adjusting button does not operate. It необходимодля that at casual pressing the button not to break adjustment of external mirrors.


Hours with digital indication

The models equipped with system of climate control


The current time is highlighted on the display of assembly of hours only at the included ignition.

Time installation by proizvoditsyasleduyushchy image:

a) Include ignition, - on the display areas of indications of hours and minutes should be highlighted;
b) Press and hold the HOUR button (Hours) until indications of the first two categories of the indicator will not accept the correct value corresponding to a number of hours of the current time;
c) Press and hold the MIN button (Minutes) until indications of the last two categories on the display will not accept the correct value corresponding to number of minutes of the current time.


The models which have not been equipped with system of climate control

Hours with digital indication show the current time only at the included ignition.

Time installation by proizvoditsyasleduyushchy image:

a) Include ignition, - on дисплеедолжны to be highlighted areas of indications of hours and minutes;
b) Press and hold the button H (Hours) until indications of the first two categories of the indicator will not accept the correct value corresponding to a number of hours of the current time;
c) Press and hold the button M (Minutes) until pokazaniyaposledny two categories on дисплеене will accept the correct value corresponding to number of minutes of the current time.

The button R is intended for fast updating of indications of hours on signals of exact time. If since the beginning of the current hour passed no more than 30 minutes, on hours time corresponding to the beginning of the last hour is established. If since the beginning of the current hour passed no more than 30 minutes, for hours time corresponding to the beginning of the next hour is established. Haпpимер:

Initial indication of hours

1:06 1:00
1:52 2:00

The holder for glasses

The holder for glasses располжен on the central console автомобля.

Using the holder, be careful, - try not to burn and not to burn other passengers hot drinks. Keep in mind that many drinks can spoil appearance of floor rugs, upholsteries of seats of internal panels of doors. Hit of splashes of liquid on electric contacts can become the reason of failure of electric equipment of salon.

Tray for coins

The sliding tray for coins is built in in the central part of the dashboard. To open a tray, press on the upper edge of its cover. The tray is closed by pressing on крышкудо clamp click.


Toilet pocket mirror

The toilet pocket mirror is established driver's sun-protection козыке and protected by a cover.


Lever of raising of the parking brake

For raising of the parking brake completely lift up the lever located between forward seats. Otpuskaniye of the parking brake is made as follows: tighten the lever up a little, press the button of a clamp located at an end face of the handle, then lower the lever down. At an otpuskaniye of the parking brake the corresponding control lamp which has been built in in an instrument guard of the car, should go out (see above in this Section).

Movement with the cocked parking brake can lead to failure of brake mechanisms and bearings of naves of back wheels!


Lighter

The lighter функционируеттолько at two provisions of a key in the ignition lock: "ASS" (I) or "N G" (II) when ignition or a food of auxiliary consumers of the electric power is included. For turning on of the lighter drown before click its button. After heat of a spiral the button the automatically soshchelchky will return to a starting position.

In order to avoid a lighter exit out of operation, not priderzhivaytey the button during spiral heating!


Ashtrays

The forward ashtray is incorporated in uniform assembly with the lighter. For opening of an ashtray pull for edge of its cover. After use close an ashtray, having pushed it in the control panel. To clear an ashtray of stubs, open a cover of an ashtray and completely take the reception container from the landing nest, having pulled it on itself.

The back ashtray is built in a back part of the central console. For opening of an ashtray press top ny edge of its cover and lower after I spend the day. To clear пе a pelnitsa of stubs, open it, then lift up and completely take the container from the nest in the console.

Use ashtrays only on the direct appointment. In order to avoid ignition do not put in ashtrays scraps of paper, a wrapper from candies and other combustible materials. Garbage ignition in ashtrays can cause a damage to your car.


Devices of illumination of salon

Main salonny lamp


The switch of the forward (main) salonny lamp has three fixed situation.

In some options of execution of the car by means of the same switch turning on of back lamps is made also. In the situation "About" It (is switched off) the lamp does not burn. On the average position of the switch the lamp automatically lights up and dies away at opening/closing of any of car doors. In position "I" of the switch the lamp burns constantly.


Lamps of local lighting

Switches of lamps of local lighting are located near plafonds of the corresponding lamps (left ipravy). For turning on of the lamp press the button of the corresponding switch. For switching off of lighting press the same button repeatedly. Lamps local освещенияфункционируют at any положенииключа in the ignition lock.


Illumination of the lock of ignition

On some models illumination of the lock of ignition is provided. Illumination joins when opening a driver's door and continues to burn within several seconds after its closing.